Dejon Tool "Big Race" Front Mount ?'s

[GrungeAholicVR4]

http://www.dejontool.com/3S.htm

Theres the link, Im about to order this intercooler kit to almost finish all my reliability mods so I can start ordering performance mods then. My question was though, I have a DN performance Y-pipe...I think the kit eliminates it, any other ideas? does it? can I still use my pipe? Would I have to sell it? ect....any help and time would be greatly appreciated.

Thanks, Matt

[Hotshot8792]

from what i understand, all front mounts will eliminate the y-pipe, because the front mounts only have one opening for incoming air and one opening for leaving air, so the pipes coming from the turbos will meet before they go into the intercooler, so there is no reason to split them back up before going to the throttle body. If you do get a front mount, just sell your dn y-pipe, i know you wont get all 200 back, but i'm sure you'll get at least 150 for it on 3si.

[GrungeAholicVR4]

Originally Posted by Hotshot8792

from what i understand, all front mounts will eliminate the y-pipe, because the front mounts only have one opening for incoming air and one opening for leaving air, so the pipes coming from the turbos will meet before they go into the intercooler, so there is no reason to split them back up before going to the throttle body. If you do get a front mount, just sell your dn y-pipe, i know you wont get all 200 back, but i'm sure you'll get at least 150 for it on 3si.

Thats what i was figuereing and afraid of, i didnt want to lose my brand new never blown off y-pipe, i love it and cheerish it soooo much. lol...i guess ill sell it....

Thanks

[Hotshot8792]

Originally Posted by GrungeAholicVR4

Thats what i was figuereing and afraid of, i didnt want to lose my brand new never blown off y-pipe, i love it and cheerish it soooo much. lol...i guess ill sell it....

Thanks

if you think about it, its not too bad, because you'll still probably end up with a polished pipe, i guess depending on which kit you get, but you'll have a silicon coupler, it'll just be like having the dn y-pipe but without the Y

[GrungeAholicVR4]

Originally Posted by Hotshot8792

if you think about it, its not too bad, because you'll still probably end up with a polished pipe, i guess depending on which kit you get, but you'll have a silicon coupler, it'll just be like having the dn y-pipe but without the Y

Yea, its just like, I got pictures of it. like a Y without the actual split and "Y". Im getting a digi soon, so ill send pics when im done. Thanks again for all the help. The install shouldnt be that bad.

Matt