Wires And Plugs

[94V6Camaro3.4]

Anyone know what the best Plugs and wires would be for my 94 v6 camaro? Im looking for some really nice performance plugs and wires, but not something that will set me back 500 bucs, lol.. Anyone?

[tacoma man.]

i replaced plugs and wires in my 90
rs and it wasnt over 60 bucks.
and i bought the red wires to match the
car. you can get a cheap set for $20
or a really good set ( accel ) for $75
when you go to get the parts tell the
person behind the counter what you have
and what you need. they can tell you the
best brand for your car. and for the 3.4
i strongly recomend that you get factory
spec plugs. i know some one who put them
bosh platenum 4's in his and he burn the rings
out of it.

[89IROC&RS]

well, pretty much, any good pair of wires are the same as the next pair. and the best way to get the most of your spark plugs is to make sure they are gapped correctly, and are indexed. you want them perpendiclar to the flame front in the cylender.

[ridge_runner]

yea i agree with 89, i run autolite 25s in my camaro

[Joseph1082]

Hey, IROC... you know anything about Nology, they are $150 wires (seems pretty ridiculous) and have a ground for each wire.

[DaMoNe6969]

Nology hotwires are supposed to be the shit.. I didnt get em' cuz they want too much damn money though.. That ground wire is connected to a small capasitor type dealy that builds up and holds the charge until the plug needs it.. Supposed to kick ass

[ridge_runner]

damn... ive never even heard of the f*ckers

[89IROC&RS]

sounds kinda like direct hits plug amps, never heard of those wires though.

the plug amps are at www.directhits.com

got a website for the wires????

[DaMoNe6969]

http://www.nology.com/hot.html

Check them out.. I think youve never heard of em' cuz their mainly for sport compact and import.. Havent looked into them for Camaro though

[89IROC&RS]

bad ass, cuz actually, that solves a problem for me, i was lookin at the direct hits untill i got the headers, and found out i barley have enough room to get the plugs in, let alone a screw on capasiter, these wires might be the solution, good call guys

[DaMoNe6969]

Very expensive though.. I wonder if they'de be worth it?? I cant remember what they wanted for my supra.. I know it was retarded, like $400 or $500 cdn dollars through NOPI