head lights

[justlearning]

ok i have had my 91 rs 305 tbi for a few months now and cant get my brights to work....I know i know im a dumb a$$....but i tried putting new ones in and it didnt work so i tested the power at the connector at the light and there was nothing....i tried reading the wiring schematic out of my haynes manual but it was like japeneese to me??? i think it might possibly be the switch asumming u just pull back on the turn signal lever to activate brights but when i do it dosent swing back forward when i let go like it should and i have to push it back and my brights never come on....have any of u ever had this problem??? also i cant seem to figure out how to get my tilt to work i pull the lever behind the turn signals but the wheel still wont move any suggestions??? thanks in advance

[89IROC&RS]

sounds like an internal problem in the steering column, some sort of damage perhaps??? sounds like at least your multifunction switch has bit the dust. only way i know to find out is to pull the column apart. gotta take the steering wheel off, pull the guts out and get down to it. if you dont have the tools, i recomend letting the dealership do it. but thats just me. also, have you checked all your fuses to make sure you dont have a blown out fuse causing the problem?

[Genopsyde]

prolly the switch, mine don't work either, it used to click when i'd pull back to turn em on, now it makes no noise, and i have no highs. gotta take the wheel off to get in there and replace it.

[tacoma man.]

my highs dont work on my 90 either.

[89IROC&RS]

well to be honest, none of the lights work on either of my camaros, cuz the headlight bars are removed and sitting in the shed

[tacoma man.]

....lol

[~82Z28~]

Wow the light switch on my 82 works just fine, now I just need to adjust them cuz my lights are shining all over the place.