Help!!!!!!!!!!!!!!!

[Skigin]

Iam going to put a 350sbc in my 89 mustang can anyone give me some tips or links where i can get help? thanx james

[91_T-Bird_HO_5.0]

one thing i can tell you right now is, you are gonna have to reweld your motor mounts and maybe modify the front suspension, the suspension i really wouldn't worry too much about though, it's the motor mounts that counts right now, plus you'll probably have to use a chevy trany and then reweld the fittings that connect to the rear end of the ford or just yank the ford rear end out of there all together and just use all chevy rear end parts and drive shaft, but you'll most likley have to do some mods to the drive shaft due the size difference

[Skigin]

i know it sounds dumb but i had just got a 350 for a 25%of what it would to do 351w this is in canada

[97chevyman]

i think it would have been cheaper to just go with the 351W, because now you have to change the tranny and motor mounts, all your electronics, you will need an adapter u-joint, i would have jsut went 351w, its a better motor anyhow.

[Digital Oxygen]

As far as the tranny, look into Lentech www.lentech.com , they now have adapters for all kind of engine/tranny combinations.