|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
||||
|
||||
|
Power Antenna Wiring
Hello guys and gals, it's me again. The RB25DET powered s13 from fort lauderdale Florida. I have a question that hopefully someone can help me out with. I went to the junkyard and pulled a power antenna off of a convertible s13, and this antenna has 5 wires coming out of it. and the 5 wires are:
Red/Black Stripe Black/Red Stripe Black Light Green Light Blue I have guessed that the Red/Black Stripe must be 12V Constant and the Black must be Ground and the Black/Red Stripe is the Trigger wire from the head unit, but those last two wires got me scratching my head. So if anyone can help me out with this i would be really appreciative. Thanx a lot guys and gals... |
|
#2
|
|||
|
|||
|
Re: Power Antenna Wiring
download the fsm off my sig.
__________________
Hiya... Need a FSM? Hit me up I'll send it to ya for FREE! I only have the 91-98 240sx, s13 ca18det, and s14 sr20det FSM Sorry no 89-90 yet.... Mods: Tein Flex with EDFC Hotshot Header R32 GTR Seats Advan SA3 16x7 16x8 Apexi Dual N1 Exhaust Silvia Front End Conversion Digital Climate Control Nismo 2-Way LSD Injen Intake w/ CAI |
|
#3
|
||||
|
||||
|
Re: Power Antenna Wiring
the last two wires don't connect to the harness at all i think. i recently installed a new power antenna for my car. the one i bought only had the 3 wires you figured out. hooked only those 3 wires to the 3 wires of one of the harnesses for the power antenna and it worked fine. dun know my post really helped....
still, download that FSM from vsiev. |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|