old Classifieds only thread.

[lorddarkice]

WTS: 1990 Civic HB 5-spd with AC. white.

had a bad piston, i took it apart, i have the parts to put it togeather (the piston) minus the seals (head, intake, exhaust) all that needs to be done is put it back togeather.

Condition- other than motor work- interior has a very small crack in the top of the dash, some scraches on the driver door (keymarks), everything else ment cond.

Extra shat- have a whole extra EX motor, i have a set of pistons from a D16Y8, an apline headunit, and speakers for the doors. also an extra valve cover...

$700 firm. also i have a stero stuff for sell if u want... willing to sell the sub amp, subs, and the cap in my sig. for an Xtra $400.

interested? email: [email protected] or [email protected]

[90hbvtec]

dam i got my car broken into now not into the import scene nomore...but all they stole was my used 10 in speakers and my guages, and a 5 in tach.. other then that here is what i got ...


90 civic HB si -$$3,000
b16a w/ y1 lsd tranny got the motor with 40,000 miles - $1,800
port n polish b16 head, ported 99 si intake manifold done by DHracing.com - $800
less then 2500 miles on ported head
MSD system SCI control box, blaster 2 coil- $300
will throw in a new set of distributor cap and a new SS coil- $110 if price is right..
magnecor wires- $75
STR fuel rail- $100
B&M FPR- $75
B&M fuel guage-$50
4-1 DC headers- $375
n1 type r underdrive pulley- $110
custom exhaust system- $250
race cat-$80
cold air intake-$55
neuspeed 3 piece strut bars- $200
tokico illumina adjustable struts-$400
r1 coilovers-$100
MBproducts race crossmember-$300
carbonfiber hood-$400
crossdrilled/slotted rotors- $145
GSR blades with dunlop 5000- $600
its a pretty clean 90 si civic HB

interior
replica sparco seats or if u want my stock SI seats the look good too- $400
4 piece race pedals
integra center console...

total spend on this car = bout $9,500
not including new paint job that i had it done, new timing belt, alternator belt, new waterpump, new axles,new radiator less then 1000 miles on, new brake pad less then 2500 miles..

$5,700 obo

WA residents only unless willing to pay shipping

[tokes99]

Need or want fenders for your crx? I got pairs z3 fenders that I need to get rid of, get at me [email protected]

[T-Mo]

I have a few things that I am trying to get rid of. Make me an offer. I am in Atlanta, GA.

I have a OEM Steering wheel in great condition:


Cargo cover holders. Just need a little cleaning. That can be done :thumbup:



I have 2 center pc tail reflectors. One black and one red one NO Cracks:



Mud Flaps, one set is for an 88-91 Civic; the other for a 92-96 Prelude (both for front)


I also have the center console(not pictured) and shiftboot. Just the plain one tht came in the car. I have a GSR console in it now.


Also I have a passenger side tail light that I can't use. It is from an 88/89 model and I need one for a 90/91. I will either sell or trade.

IM me if you need this stuff or email me: [email protected]
AIM: tesham3
MSN: [email protected]

[lewtz]

I have a black 88 CRX Si, I need to get rid of. I have had it a while and planned on fixing it up, and such. Long story short, never got around to it.

Been told I need to get it out of the garage. It is not running (not a blown motor or anything), just has been sitting in the garage a while. Needs a battery and probabaly some minor work. It has been sitting for about 7 months now, or so.

It would need a new passenger fender and front bumper, as previous owner bumped into something. Overall I would rate the condition 6/10. If it didnt have the front damage i would rate maybe an 8.

I can send you pictures and such, on request.

Car is located near Clemson South Carolina.

E-mail me at

[email protected]


Thanks
Lewtz

[Autocratic_1st_Gen]

$35 + shipping


$40 + shipping (82k mi)



$125+shipping (88 Si trans, 21 spline)



$20 + shipping 1 broken stud

Make offers if you dont like the prices, make your offers $xx + shipping and calculate your own shipping cost (zip 52404) to make offers accordingly. i respond fastest to email ([email protected]) or AIM ( "krustindumm" )

[90cIvIcSiR]

Someone make me an offer, clean set of SiR tails....no cracks, very few MINOR scratches, great condition. Missing vtec logo. NEED TO SELL, baby on the way.

Send offers to:

[email protected]

[Jetts]

anyone got a running hatch that they want to get rid of cheap that runs good!
i want a daily driver, my truck is getting too much money spent on it, to let idiots driving hit it

[JimCRX]

FS: 4 New Fuel Injectors! $100 for all 4 + seals + shipping!

Unsure what model CRX, but I will say this to be honest about them. I put them in my 91 crx si d16a6, and I have few minor mods, exhaust, intake and the car seemed like it was getting too much fuel. So these injectors seem to have a higher flow rate than the stock crx injectors.

They have this number on them: RTN-140

[90civicrider]

I have 15 things up for sale on eBay.
Maybe something can be usefull to you. Check it all out.
http://cgi6.ebay.com/ebaymotors/ws/e...ort=3&since=-1

[travagliante]

Im selling my D16y8 mini me tubo set up. Everythin included. Main reason, ...tears...im selling the civic.....ahhhh. well i hope this setup goes to a good home. It comes with EVERYTHING, including the mini me swap, turbo manifold, vtec switch, tb, trubo manifold, etc.

Check it out

http://cgi.ebay.com/ebaymotors/ws/eB...tem=2473402352

highest bidder wins it!!!!

[shaddr3]

WTB: I need strut bars for the back hatch of a CRX. My 89 CRX Si 's struts do not work. I am looking for a WORKING pair. Email me at [email protected] or AIM @ Difiani if you can help me out, thanx!

[Carnivore]

Looking for the following for 91 hatch:
-WW sides and rear
-Aftermarket struts(kyb etc)
-Springs/coilovers(skunk2s mostly)
-90-91 SI ecu and dizzy

[91civichatch2571]

Im looking for a passenger side front lower control arm off of a hatchback. Also, I need the damper fork. They must be straight. If you have a parts hatch, let me know because mine was driven into a ditch and the allignment is f'ed up.
Im also looking for a ZC block thats in GOOD CONDITION

[Civic Jim]

WTB : chrome oil filler cap, and some aftermarket, blue plug leads for a B16 also

will trade part ex for 1 set of 90-91 EDM tails (no centre piece)