|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
05-21-2004, 04:35 AM
|
|||
|
|||
|
1973 Dart Swinger
I need some help putting my 73 swinger back together, if anyon ehas interior parts please let me know...i could also use a trunk pan...
Thanx 
|
|
#2
05-23-2004, 01:36 PM
|
||||
|
||||
|
Re: 1973 Dart Swinger
Installation is the reverse of removal.
|
|
#3
05-24-2004, 06:24 AM
|
||||
|
||||
|
Re: 1973 Dart Swinger
A '73 swinger is no 323....
But I'll be nice... Try allpar.com Year one reproductions, Chryslers at Carlisle (twice a year in PA) Or, your local Salvage yard. You'll be suprised how well the interiors will wear just sitting in a bone yard... What do you need? I've got a lot of Dart Parts, but mostly '67-69 stuff, so most of what I would have is different, and GT rather than Swinger parts. Fix your trunk pan. there are 4 basic parts, and with a little elbow grease and a welder, you can doo a better job than the "replacement pans" you can buy. They almost always are wrong-cut, misshaped, too deep/too shallow, and god help you if the shock brace and fuel tank cover is rotted out, then you just need another whole car. But, who knows..... good luck, Slantsixness
__________________
 If I knew what I did to break it, I would've known not to do what I did.www.classicwinnebago.com
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
