Help Asap

[Jason Charette]

I have a 1993 chevy lumina it is stalling and in drive and trying to die in while driving down the road. It is acting just like the fuel filter is clogged so I changed it sill didnt fix the problem. I thought ok maybe its the crank sensor so I changed it still didnt fix the problem. So I tried going in reverse drives great just when I put it in drive it dies. I dont get it. In park, neutral, and reverse everything is good to go. just drive messes up. So I figured maybe cpu changed it still didnt fix the problem. Please I need some help. Thankyou Feel free to page me if you want Ill call you back.
http://www.metrocall.com/mcll/
go to send messege enter #361-744-2480
thankyou

[Jason Charette]

still needing help

[Jeremy-WI]

does it try to die at 45mph and higher? low speed or while applying the brakes?

[Jason Charette]

all of the above but it drives great in reverse. every one says tcc I just cant find it

[Jeremy-WI]

There should be a plug on the transmission just to the drivers side of the engine should have 3 or 4 wires going to it, one wire will be tan with a black stripe. Once you unplug the connector it should be fine. Check the RPO codes in your glove box for M13, MH1, ME9, or MD8. I don't know if a 93 Lumina would have an M13 but if it does, it will be a different procedure to fix

[Jason Charette]

thankyou still looking cant find it you couldnt by chance send a pic? [email protected]

[SlamminMOfo]

If its going fine in reverse, I dont think its TCC... when I had the TCC problem, Drive or Reverse would instantly stall the car until it cooled.

[kevinb70]

check the vacuum line to your transaxle

[Jason Charette]

Thankyou Ill look for the vac. Here is one for you I disconected the speed sensor car runs fine what is in the circuit for the speed sensor does any one know...

[Jason Charette]

???