new speakers...

[mentos]

okay ive picked out some speakers that im considering, and i dont know what ones to get. they are all 6 1/2 inch cause 6 3/4 inch ones practicaly dont exist. so what do you think, should i get...

Infinity Reference 6002si

Kenwood KFC-1669S

Kicker 02K60

Pioneer TS-G1640R

or

Rockford Fosgate FRC4206U

so what do you think? they all would fit, and they all are of good qaulity, but idk which one. or if you know some that would fit taht are better but are under $120 lemme know.

[mentos]

oh, and this is all for the front door speakers...

[Jet-Lee]

my opinion...I would rather have either the kicker or the infinity, leaning more towards infinity, especially because its for the front door speakers. My stereo setups usually go with the highest frequency/quality in the front, and the lowest frequency in the back, ALL individually controlled via EQ's.

[MrMechanix]

I would go with Kicker, im gettin the Kicker K525 5 1/4" speakers, for my 97 escort. Apparently Kicker is one of the best brands out there....so I've heard. Also some helpful info for if you get Subwoofers, Kicker Solo Barics, are unbelievably sweet. I'm puttin two 12's in my escort.

[Jet-Lee]

Geez Mechanix....a little overboard? Two SoloBaric 12's in a little Escort?! gonna push 'em to the max, or keep 'em restricted? What kind of box u gonna use?

[MrMechanix]

LoL, not sure what kind of box I'm gonna use but I'm gonna push them as far as they can go before they shatter the windows, distort the sound, or blow the speakers themselves. What kind of box do you think I should use??

[Jet-Lee]

box to use...not quite sure how to describe this box, so here's a rough sketch

Top View of chambers:
______________________
|......................................|
|.................|..|................|
|.................|..|................|
|.................|..|................|
|_________|..|_________|
......sub......port.....sub

Front View:
______________________
|.................|...|................|
|......SUB.....|...|......SUB....|
|.................|...|................|
|_________|__|_________|
..................port

Ignore the dots...Anywhere you see a "." is just air, but had to put them in there to make the drawing work...
The port is about 3" wide and is as tall as the box. The opening in the back of each chamber is about 2-3" wide. Does this make any sense? You can buy this type of box premade...I don't know why, but this is the most awesome sounding box I've ever heard!

[MrMechanix]

Yeah thats not makin a whole lot of sense to me, but thanks for trying lol