Help! '03 DVD wiring schematic/info needed!(BIG POST)

[CrzyBone]

Please help! I won this auction for a stolen-recovery '03 yukon DVD player. I figured for 100 bucks, I couldn't go wrong. Well, it arrived today, and the housing is shot, so I'll have to figure out another way to mount it.

Questions:

1.)Can I buy a harness to connect directly into the rear, or will I have to jimmy rig something?

2.)Can you guys tell me which are the power and ground prongs so I can test it to make sure it works? Anybody have any wiring diagrams? It has a 12-way connector(2 rows of 6).

3.)Is it possible to purchase a new housing(shell) from the stealership(or other means) that I can swap it over into, or do they only come fully loaded?

For those of you that might think that I got this by illegal means, here is the auction(just so we're on the same page)[8D]:

http://cgi.ebay.com/ebaymotors/ws/eB...ME:B:EOAB:US:6

A couple of pics to help:






It still has fingerprint lifting dust on it. So what do you guys think? Any help will be appreciated.

[CrzyBone]

If the link I provided to ebay doesn't work, try this one:

http://cgi.ebay.com/ebaymotors/ws/eB...tem=2468505323

[CrzyBone]

Anybody?

[gable74]

Im going out on a limb here because i see no one has replied to your post. This is purely guessing on my part and im assuming that it is like the rest of the GM harness set ups. There should be 6 wires that are needed to make this operate correctly.
1. + voltage
2. ground
3. right audio
4. left audio
5. common audio
6. Class II data wire

Those are the six wires you need to identify. I would start there. Go to a GM dealership and ask for some expanded view drawings, and some RSE wiring harness schematics. Plenty of dealerships will be more than happy to supply you with these. Good luck

[CrzyBone]

Cool, thanks.