|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
03-29-2004, 06:06 PM
|
|||
|
|||
|
sr20det redtop to 89 s13 wiring question
I wanted to know if anyone knew if there is more wiring need other then just the main engine harness? If someone could give me some information on wiring for the sr20redtop to a 89 s13 SOHC chassis.
__________________
1989 s13 Fastback Tein HE coil-overs sr20det swapped! JIC Magic Front and Rear Strut Bars Slotted and Cross-drilled Rotors S/S Brake Lines Pivot Lazy eye controller Blitz LM Intake Blitz D1 Spec Turbo Timer Soon to come: Sard 550cc Injectors Blitz Nur Spec Exhaust Blitz Down pipe HKS FMIC http://www.driftmonkey.com (Part Owner) 
|
|
#2
03-31-2004, 07:06 PM
|
|||
|
|||
|
Ttt
__________________
1989 s13 Fastback Tein HE coil-overs sr20det swapped! JIC Magic Front and Rear Strut Bars Slotted and Cross-drilled Rotors S/S Brake Lines Pivot Lazy eye controller Blitz LM Intake Blitz D1 Spec Turbo Timer Soon to come: Sard 550cc Injectors Blitz Nur Spec Exhaust Blitz Down pipe HKS FMIC http://www.driftmonkey.com (Part Owner)
|
|
#3
04-01-2004, 12:02 PM
|
||||
|
||||
|
Re: sr20det redtop to 89 s13 wiring question
I just completed my 89 s13 sr20det swap. I went to a junkyard and chopped a bunch of plugs off of a newer sentra and spliced them in. I used wiring diagrams I found online. If you want you can e-mail me and I can send you some diagrams I made of the harness conversion and pics. I didnt need the engine harness, a waste of money if you ask me. My car started on the first try. I had to add about 10 wires. If you can handle a soldering iron, read wiring diagrams, and use a multimeter this swap isnt too hard. Just e-mail me if you have any questions.
|
| ||||||||||||||||||||||||||||||||||||||
|
POST REPLY TO THIS THREAD |
 |
|
|
