|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
01-08-2002, 06:01 PM
|
|||
|
|||
Shift Lever to transmission...broke?
Help,
I have a '92 Ranger. The clutch went out. While the transmission was out of the truck, I tried shifting the transmission to make sure it was in neutral. It was in neutral but it would not catch a gear. I've now put the truck back together and I still have the same problem. I have a suspension that the shift levers nut was removed and if that has a bearing on the lever not catching inside the transmission? Thanks for your help....anyone want to buy a '92 Ranger:zx11pisse 
|
|
#2
01-23-2002, 07:34 PM
|
|||
|
|||
|
Was the tranny in neutral when you removed the gearshift? If not, then the shift forks are out of alignment.
Check out www.mechanicmatt.com - he has info on how to align the forks with the shifter out of the tranny (basically it puts it back in neutral so you can reinstall the lever). Good luck!
__________________
JW™ "Not Cocky, Just Confident" ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Ranger Power Sports • Offroad Rangers • The Ranger Station • RRORC
|
|
#3
07-28-2002, 11:48 PM
|
|||
|
|||
Exact Page
__________________
MM Techniques -- http://www.mechanicmatt.com
|
| ||||||||||||||||||
 |
POST REPLY TO THIS THREAD |
 |
|
|
