|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
I just replaced the upper radiator hose on my mom's 740il and I have no idea how much coolant to replace. I can't decipher the little diagram next to the cap. What if I filled it to the top on a cold engine? Not that I did that or anything.
|
|
#2
|
|||
|
|||
|
Re: How do you measure the coolant?
take it to a mechanic and he will hook it up to a gauge goes on top of the cap and measures the pressure
|
|
#3
|
|||
|
|||
|
filling the coolant
using a 50% mixture of antifreeze in the continental US is OK.
If topping it off just get close to 50%. It will also need to be bleed to get the air out. No big deal just a screw to remove and replace when the air is gone. Then top off the reservoir with 50% antifreeze or premixed. Later,
__________________
![]() |
|
#4
|
|||
|
|||
|
Re: How do you measure the coolant?
another question about coolent. my 735 runs hot, did the pressure check, everything ok, cleaned the radiator with a spray cleaner solution, meant especially for that, but it still runs hot. what can it be?
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|