Installing new gauge face

BlackyK · #1 03-08-2004, 09:32 AM

I just got new gauge face for my '99 Cavy. It didn't come with specific instructions for installation. How do I take the dash off and safely remove the stock gauge face and replace it with my new one?

Thx alot.

SilvrCavQt · #2 03-09-2004, 01:33 PM

Well if it's anything like the 2000 cavalier, you have to remove the top of the dash first then the plactic dash second. and you may be able to just place your new gauges over the stock ones, thats what i did and it still looks good. Dont remove the needles

2000 Chevy Cavalier 2.2L

SilvrCavQt · #3 03-09-2004, 01:35 PM

Link not working, try this:2000 Chevy Cav 2.2L

studballs · #4 03-09-2004, 01:45 PM

95-99 its ok to remove the needles...they come off easily...

STYLEZ24 · #5 03-11-2004, 07:57 AM

yep, use a fork or something to pop them off gently.. make sure you mark all needle points, both when the car is on and off.

Thread Thread Starter Forum Replies Last Post

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Installing New Gauge Cluster	jgw2205	Thunderbird	0	12-16-2004 10:01 PM
Installing new gauges on 2002 altima	wmora	Altima	0	09-28-2004 03:44 PM
putting on new gauge faces	dshawnluv	Probe	1	04-26-2004 05:11 PM
New Gauge faces	Franky-5-Fingaz	Thunderbird	15	04-23-2004 02:29 PM
New gauge face installation	filmfiend81	'92-'95 Civic \| EL \| Civic Hybrid \| Civic GX NGV	10	11-26-2001 06:25 PM

POST REPLY TO THIS THREAD