|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Engine intakes, exhaust, turbos, nitrous. |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
01-02-2002, 08:39 PM
|
|||
|
|||
|
Need Help Fast
OK every one, as some may know i live in a third world country and coming across parts for my Nissan Primera is hard as hell unless i order directly. Today driving around Guatemala City I came across a Stillen Dealer he is selling a POP charger originally designed for a 93/98 4 cilinder Golf/Jetta it looks incredibly similar to the one pictured on the catalog for Stillen products the only Noticeble difference is the pipe it comes with, tube which im willing to eliminate.
Now will this POP charger without the pipe fit my car? I measured the holes on the metal plate and there are 4 of them with the following spacing (5.5 by 8.5 cm). I know that the easy thing to do would be to fit it on my car but my car is in Costa Rica and this POP is going for $ 130 which for our countries with tax and all is a great price, so great im willing to drill new holes in it if necesary. So any advice you can give me will help. I leave in 2 days in the mean time ill try to find a G20 to go measure. 
|
|
#2
01-07-2002, 03:14 PM
|
|||
|
|||
|
OK, i went and did it, i bought the POP for the jeta and drilled new holes in it . . . of course it didn't work so now i have to refill all the holes and re-drill new ones in there to get a perfect fit
 anyway since im kinda customizing this little ops i was thinking on making some piping for the Filter iself. Not necesarealy the CAI but a long tube extension to get some resonance in the engine, thing is the OEM plastic tubing has two conectors up top that are no problem but there is a third larger one on the bottom which goes down behind the engine could this be eliminated completely?
|
| |||||||||||||||||||||||||||||||||
|
POST REPLY TO THIS THREAD |
 |
|
|
