|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Introductions Welcome to AutomotiveForums.com. Introduce yourself here so we can get to know you better. |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
02-08-2004, 11:55 AM
|
|||
|
|||
new
hi everyone,
my name is alida and i just bought a 240 sx. unfortunately, it is not running.i have had the head resurfaced and changed all head gaskets and bolts.i can see the fuel get to the injectors but i don't know how to check to see if fuel is going out of the injectors.i have a large assortment of tools at my disposal so whatever needs to be done i will do. any advice would be greatly appreciated. thanks all. |
|
#2
02-08-2004, 09:19 PM
|
||||
|
||||
|
Re: new
There is a tool to Check Injector Drop. It connects to the injector it's self. YOu then have a Fuel press gauge connected and Key the car on and then push the button, and it will fire the injector. It is a really helpful tool. You might also want to Ohm check the injectors, if you think you might have an injector problem, They should all read close to the same, not sure what spec is but The majority of them are between 13-17 ohms.
__________________
Homer: No T.V. No Beer makes Homer go... Something Something or another.............. Marge: Go Crazy...... Homer: Don't mind if I do.....muahahahahahbwauauauauauauau  
|
| |||||||||||||||||||||||||||||||||
 |
|
|
