|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
02-01-2004, 10:24 PM
|
|||
|
|||
DESPERATE! just replaced intake gasket now hard starting
I have 98 GA SE 3.1L. 82000 miles on it. Just replaced blown intake gasket. Heads, and head gaskets were okay. Whe first tried to start it after putting it back together, it would turn over but not start. Pulled plugs and they were soaked. Changed them and tried again. It started but ran rough and then just stopped. No sputter, or cough, I mean just cut out. Now just turns and won't start. There is fire to the plugs. Is there some sensor or something that would cause this to happen? I am deperate, I need this car for work and don't have a ton of money to put into it, which is why I changed the gaskets myself. Please help.
|
|
#2
02-01-2004, 10:47 PM
|
|||
|
|||
|
Re: DESPERATE! just replaced intake gasket now hard starting
Don't bother aanswereing this post the engine is shot.
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
