would u recommend this.......

[ihiustler]

a greddy kit for a integra type r? would i be able to use either the si or gsr kit if modded? also i know the drag3 kit is a nice kit but i was wondering if the greddy would be a better route considerign my compression is high already? any advice is appreciated thx guys

[pvang31019]

boost is boost...

[thequickest GS-R]

I would recommend some low compression pistons and a Rev Hard Stage 2 turbo with IC.

Ben

[DavidG]

i say you can get any turbo you want but if you wanna have engine for a long time, you need to lower the compression in your ITR cause 11:1 is kinda high for FI

[jOYRiDe]

ive seen turbos in ITR before but i dont know what kit it was or the compression it was running

[b16b bomber]

you can get a thicker head gasket to lower the comp...and turbo will be fine on it...i think inline pro makes one that can be lowered to 9:1

www.inlinepro.com

[Racing Rice]

Originally posted by b16b bomber
you can get a thicker head gasket to lower the comp...and turbo will be fine on it...i think inline pro makes one that can be lowered to 9:1

www.inlinepro.com

I would agree... Atleast put a thicker head gasket in..