|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
01-10-2004, 11:00 PM
|
|||
|
|||
2000 chev express van keyless entry
How can I reprogram this keyless entry without the dealer? I have a total of 3 remotes and I have only one working. It seems when the battery dies so does the remote...I have tried and errored by chance on some methods but is hopeless without the right combination. The Gun
|
|
#2
01-11-2004, 08:14 AM
|
||||
|
||||
|
Re: 2000 chev express van keyless entry
Transmitter Synchronization Domestic
Resynchronization may be necessary due to the security method that the remote keyless entry system uses. The transmitter does not send the same signal twice to the receiver. The receiver will not respond to a signal that has been sent previously. This prevents anyone from recording and playing back the signal from the transmitter. Resynchronization may be necessary under the following conditions: The transmitter battery is changed The vehicle battery is disconnected The transmitter buttons are pushed 256 times out of range of the receiver In order to resynchronize the transmitter with the receiver, stand close to the vehicle and simultaneously press and hold the LOCK and UNLOCK buttons on the transmitter for 7 seconds. The door locks should cycle in order to confirm resynchronization.
__________________
Why do you never have enough time or money to do the job right the first time, but enough time and money to do it again? Got all the certifications 25 years ASE Certified Master Technician GM WCT Yea..I work at a DEALERSHIP....got a problem with that? Want to diagnose cars like the Pros? FOR SALE: OTC Perception 2 channel Labscope (badged as a Matco Reality) This is my personal labscope that I use to diagnose waveforms, like new, comes with leads and training video PM Me for details
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
