|
| Search | Car Forums | Gallery | Articles | Helper | Quality Dog Food | IgorSushko.com | Corporate |
|
| Latest | 0 Rplys |
|
|||||||
![]() |
Show Printable Version | Email this Page |
Subscribe to this Thread
|
|
|
Thread Tools |
|
|
#1 | |
|
AF Newbie
![]() Join Date: Dec 2003
Location: Middletown, Ohio
Posts: 20
Thanks: 0
Thanked 0 Times in 0 Posts
|
Jeep wont start when warm
I have an 89 Jeep Cherokee with a 4.0 liter engine. It will start fine when the engine is cold, but after I run it for 15 minutes or longer it will not start back up. When I turn the key the motor does'nt turn over, It does'nt click or make any kind of noise. The accesories inside the jeep will still work. If I wait 10-20minutes it will start again. I have replaced the ignition switch, starter, and starter relay and it did'nt fix the problem. Any ideas would be great.
|
|
|
|
|
|
|
#2 | |
|
AF Newbie
![]() Join Date: Dec 2003
Location: Middletown, Ohio
Posts: 20
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Jeep wont start when warm
I took the nss switch off the jeep. Took it apart and cleaned it and greased it. This seems to have fixed the problem. If anyone wants to know.
|
|
|
|
|
|
|
#3 | ||
|
AF Newbie
Join Date: Jan 2004
Location: Maple Valley, Washington
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Re: Jeep wont start when warm
Quote:
|
||
|
|
|
|
|
#4 | |
|
AF Regular
Join Date: Jul 2003
Posts: 50
Thanks: 0
Thanked 0 Times in 0 Posts
|
Hi,
NSS = Neutral Safety Switch. This switch is ONLY found on an automatic transmission. It is actually several switches in one unit, and a common problem on automatic Jeeps. ![]() As to where on the transmission it is, I have no clue, as I never have and probably never will own an auto Jeep -Nick
__________________
1988 Cherokee Pioneer, 410,016 miles! 1997 TJ Wrangler
|
|
|
|
|
|
|
#5 | |
|
AF Newbie
Join Date: Jan 2004
Location: summertown, Illinois
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
typically the CPS is the culprit as it takes over when the engine is warmed up. 1st 15 minuet the engine runs without the CPS active. But once the engine warms up the CPS activates. Could it be that a loose connection was found??? in any event, thought i'd post as a second possible solution.
|
|
|
|
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|