|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
11-27-2003, 12:00 AM
|
||||
|
||||
|
mazda 4 banger jdm cams wanted n.e. info?
hey people i have a 626 1.8litre four banger, the cams are shot so i was wondering if anyone knows where i can get some jdm cams to up the power as long as i have it apart?? thanks for any info.
~nemeii~
__________________
TheRe Is aLwAyS a WaY, MeReLy FiNdInG ThE pAtH tO tAkE iT Is ThE TesT. 
|
|
#2
11-29-2003, 01:47 PM
|
|||
|
|||
|
Go to corksport.com and look it up. There's alot of stuff for our cars. The FP engine is almost the same as the FS minus the fact that the FP block is shortened for the displacement. Or you can order some Crane Cams from the U.S., but I'd look up the site to be certain if they have it or not. Another thing, There's a member in Mazda626.net that has his 1.8L turbo'd and goes by the name of Mazdarati, so check him out in there and ask him about what he done. If not, do an engine swap for the bigger 2.0L engine
|
|
#3
11-29-2003, 07:47 PM
|
||||
|
||||
|
actually it is already an engine swap, im getting the mazda engine from a friend who s had a new one put in his 626 because the cams on this engine im workin on got very fugly and were slamming the valves. i have a merc. capri stock it has a 1.6 litre so im swapping out to the bigger 1.8, cause thats the only engine i can afford (almost free
 ) but ill look into the othr guy and i cant find anything fr a 1.8litre engine on corksport  bummer....
__________________
TheRe Is aLwAyS a WaY, MeReLy FiNdInG ThE pAtH tO tAkE iT Is ThE TesT.
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
