85.5+ 944 parts

[NonovUrbizniz]

I work for a company that is parting out several porsches...

1-2 928's (one S I believe)
4-6 944's (I beleive there is one S type as well)...

We have lots of wheels and interior peices...

A good amount body pieces.

Lots of rear 4piston brembo calipers.

Much more...

Below you will find a link to our website There are 3 porsches listed with all parts still available listed for those cars.

http://europeancarpartsandrestoration.com

1985 Porsche 928S:

http://europeancarpartsandrestoratio...928s_1711.html

1986 Porsche 944 T:

http://europeancarpartsandrestoratio...944t_2346.html

1988 Porsche 944 NA:

http://europeancarpartsandrestoratio..._944_1604.html

In addition there is a section for all of our wheels Most have Stock Part Numbers and offsets listed If you have any questions about a specific wheel pictures are available.

http://europeancarpartsandrestoration.com/wheels.html

In addition to the 3 whole cars listed with inventories... we have SEVERAL whole interiors out of various 85.5+ 944's as well as other various parts that were removed from cars before we junked the chassis.
Post here or email me at:
[email protected]

[NonovUrbizniz]

bump

[NonovUrbizniz]

We have several:
Dash's
Door panels & trim (both sides)
Dash pieces & trim
2 Pass. Airbags
Rear seats
Rear deck retractable covers
wheels (phone dial both 15 & 16's (widths for front and rear), Design 90's (both chrome and normal finish) Fuchs (black and some red)).
Sunroof motors/relays
Guage clusters (both turbo and non)
Exhaust sections (From manifold back to muffler)
Bumpers
Bumper support/reinforcement

Some:
Doors
Rear hatches
Spoilers (both under and upper)
Intercoolers
Turbos
Wastegates
Glass

and more...

Feel free to make offers.

[NonovUrbizniz]

Reasonable Prices...

[NonovUrbizniz]

bump.

[over1g]

Where are you located, and would you be willing to split a set of phone dials? How much for the rears only, fronts only and the set (16 inch turbo)?
Ahmet

[YeTi]

do you have the inner arm rest things that go directly on the inside of the door?if so, what color/ what price? do you have the wind deflector that goes on the sunroof (the plastic retractible lip) wheels... what is the width of the rear 16's? any snowtires by chance? rear hatch latch accuator? what about n/a engine parts?
thanx

[YeTi]

oh! and a rear bupmper and trim

[NonovUrbizniz]

Originally Posted by over1g

Where are you located, and would you be willing to split a set of phone dials? How much for the rears only, fronts only and the set (16 inch turbo)?
Ahmet

I'm sure if I do some digging there will be a pair of rears that are not part of a complete set...

The phonedials come in 2 heights and several widths...
15*6
15*7
16*7
16*8

There may be more but those are the sizes I know of... I will check on a set of rear 16"'s for you today or tomorrow...

Minimum will be around 125 a wheel... average would be more like 150-200.

[NonovUrbizniz]

Originally Posted by YeTi

do you have the inner arm rest things that go directly on the inside of the door?if so, what color/ what price? do you have the wind deflector that goes on the sunroof (the plastic retractible lip) wheels... what is the width of the rear 16's? any snowtires by chance? rear hatch latch accuator? what about n/a engine parts?
thanx

We do have the armrests... in black only.. they are 75 per side. and it's JUST the armrest... not the cloth covered pocket too.

The reason the price is a little high is I would have to break up a door panel set in order to sell these...

We may have the sunroof lip... but I'm not sure... I will check and get back to you here.

As above mentioned the 16" phonedial wheels are 16*7 front and 16*8 rear.

No snow tires.

We should have the rear latch actuator... I will have to check prices on that...

And I don't think we have any engine parts for an NA block.. we have 1-2 turbo blocks that are cracked in the block so the internals would probobly be good for parts... I will check on any NA block today.

Will also check for rear bumper and trim.

[YeTi]

thanks

[NonovUrbizniz]

Ok.. sorry it's taken soo long to get back here...

The rear latch actuators are VERY expensive from the dealer about 180 with the neccisary hardware (it's new part that requires the use of some special screws to get it to fit right.)

Used they go for 50-60.

I could sell you one for 50 plus shipping. We do have one and it DOES work... I tested it.

The rear bumper and trim...

We do have one rear bumper that I know of off of a 86 turbo.. it has the complete lower valance and everything... That's going to be 500 for everything... I will take pics if you like... it's in near new condition...

let me know either way...
Mike Dillon
[email protected]


European Car Parts and Restoration
(203)-949-4881
(877)-708-5892 (toll free)
57 North Plains Industrial Rd
Wallingford Ct 06492

[YeTi]

yes pics would be nice thank you

[NonovUrbizniz]

send me your email address... I don't have any place to host the pics here.

Mine is...

[email protected]

[YeTi]

[email protected]