|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Classifieds buy and sell, no vendors. |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
12-11-2001, 02:36 PM
|
|||
|
|||
|
F/S: Xenon White Bulbs
-------------------------
The bulbs are manufactured by a company called Mercury and they are from Japan. Mercury Xenon White are available in the following blub sizes: HEADLIGHTS 9003 - 110w 9003 - 130w 9004 - 110w 9004 - 130w 9005 - 110w 9005 - 130w 9006 - 85w 9006 - 110w 9007 - 110w 9007 - 130w H1 - 100w H1 - 130w H3 - 100w H3 - 130w H4 - 100w H4 - 110w H7 - 100w H7 - 130w $22.00 shipped per pair order 5 pairs of and i'll sell em to you for $20.00 per pair.. OTHER LIGHTS 1156 (single filament) - 50w 1157 (dual filament) - 15w/50w 3157 (dual filament) - 15w/50w 7440 (like 3157 but no plastic piece) - 15w/50w 168 - (not sure on wattage) 194 - (not sure on wattage) 881 - 37.5w 898 - 37.5w $20 shipped per pair INTERIOR LIGHTS 3022 (10x31mm) 3175 (10x36mm) interior lights: $10 each. Payment can be sent via PayPal to [email protected]. If you'd like to purchase bulbs, please send me an email, [email protected]. 
|
|
#3
12-11-2001, 05:24 PM
|
|||
|
|||
|
damn dude 130W with the 9004's? Wouldnt that melt the wire harness right off?
__________________
-Brian Jones I got a snake man
|
|
#4
12-12-2001, 12:03 PM
|
|||
|
|||
|
Quote:
|
|
#5
12-12-2001, 12:06 PM
|
|||
|
|||
|
Quote:
That's our high watt application.  After doing some research, I've found out that the #1 reason for a melted harness was improper installation. If you do not PLUG the bulb in completely into the socket, water and elements squeeze in between the bulb and the socket, and soon thereafter they get fried. Even though you feel you have pushed the bulb all the way in the harness socket, you probably haven't. Last edited by RyRy; 12-14-2001 at 02:32 PM.
|
|
#6
12-12-2001, 01:51 PM
|
|||
|
|||
|
You say upgraded...but im interested in if this melts the STOCK harness, as our bulbs are normally 45W
__________________
-Brian Jones I got a snake man
|
|
#7
12-13-2001, 11:02 AM
|
|||
|
|||
9004 - 130w
I am also interested in getting some bulbs but I am concerned that 130w will melt the harness.... Do you know of any one with a P10 that has used this bulb? 
__________________
Juan Black 91 G20 slightly modified "My goal is not to be the Fastest. Only faster than you Mr. Honda owner! My Website
|
|
#8
12-14-2001, 11:44 AM
|
|||
|
|||
|
I just orded a set of 130w for my P10..... With any luck I won't f-up the harness..
__________________
Juan Black 91 G20 slightly modified "My goal is not to be the Fastest. Only faster than you Mr. Honda owner! My Website
|
|
#9
12-14-2001, 12:25 PM
|
||||
|
||||
|
Str8 what kinda front bumper is that? was it hard to modify , also how hard was it to get teh M3 skirts to fit? alota money??
|
|
#11
12-14-2001, 02:14 PM
|
|||
|
|||
|
95_g20_p10
You can read about the details here..... Details But, the front bumper is for a 90-93 accord "Big Mouth" It took a little work to get it to fit. This side skirts are also for the accord, they are just M3 look alikes. I got them used for $115.
__________________
Juan Black 91 G20 slightly modified "My goal is not to be the Fastest. Only faster than you Mr. Honda owner! My Website
|
|
#12
12-14-2001, 02:33 PM
|
|||
|
|||
|
Quote:
|
|
#13
12-14-2001, 02:33 PM
|
|||
|
|||
|
Quote:
|
| ||||||||||||||||||||||||||||||||||||||
|
POST REPLY TO THIS THREAD |
 |
|
|
