Program 1997 Riviera entry keyless

[charlesnj]

Hello, I got the procedure off another posting to program entry but I wanted to know if anyone could give me a picture of the DLC. The instruction say to jump the 8 to the 4 terminal I want to make sure I am jumping the right thing. Thanx Charles

[rej]

How do I program a keyless remote for a 1998 Buick Park Ave. ??
Thanks, REJ

[bbegen]

What is DLC? Where is it located? And how do I jump it?

[UCFCamaroSS]

ok, something is wrong here, I hooked up my jumper, ant the locks cycled immediatley (without the key being in the on position) after I put the key in the on position, the locks didnt cycle, nor did the car seem to talk to my new remote, any suggestions.


Does the door have to be closed while attaching the jumper?

[BNaylor]

Originally Posted by UCFCamaroSS

ok, something is wrong here, I hooked up my jumper, ant the locks cycled immediatley (without the key being in the on position) after I put the key in the on position, the locks didnt cycle, nor did the car seem to talk to my new remote, any suggestions.


Does the door have to be closed while attaching the jumper?

Please do not resurrect threads that are over 3 months old. This was at least 3 years old since last response. I recommend starting a new thread-post.

Thread closed.

POSTING IN CLOSED OR OUTDATED THREADS:
If a thread has been closed, there is probably a logical reason for it. If you feel that the reason(s) for closure of the original thread are unjustified or wish further clarification feel free to contact any member of the moderating team. However, do not start a new thread about another closed thread.

Please avoid posting or voting in outdated threads. It merely clutters up the message board and makes it more difficult for fellow members to sort through the vast amount of information contained on the boards. If you have new and important information to add regarding a past discussion, feel free to start a new thread and if need be, add a link to the original thread.