-
Grand Future Air Dried Beef Dog Food
Air Dried Dog Food | Real Beef

Carnivore Diet for Dogs

Go Back   Automotive Forums Car Chat > Subaru > Legacy / Liberty / Baja
Register FAQ Community
Reply Show Printable Version Show Printable Version | Subscription Subscribe to this Thread
 
Thread Tools
  #1  
Old 11-02-2003, 02:36 AM
dmandave dmandave is offline
AF Newbie
 
Join Date: Nov 2003
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via MSN to dmandave
Front Panel Lights went out after installing new stereo deck

Alright so I just got a new 10" sub, 500w amp, and a new deck. I installed the new deck and had to cut all the existing wires from the stock deck and splice most to the new deck. When I finished I found that the front panel (speedometer/tach/fuel) light no longer worked. Checked all the fuses, all good. Cant figure if mabye one of the wires should have connected to something and I cut the circuit.
Current wires left unattached:
Blue on yellow (12V switched)
Orange on green (no current, possibly the spliced wire???)
Green on white (12V switched, controlled by headlight switch, Fuse #9)

Any help would be awesome, I'm a 17 year old high school kid who's just getting into this and needs a little help, thanks in advance.

- Dave ([email protected])
Reply With Quote
  #2  
Old 11-03-2003, 02:45 PM
rollins097 rollins097 is offline
AF Newbie
 
Join Date: Nov 2003
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
illumination

there's a chance you may have cross wires somewhere, I did by accident once and some smoke came out from under the steerng wheel.
If you pull the access panel off, there is a small black box, looks like a relay, it's the illumination control module, of something like that. you may want to take a look at it and see if it looks or smell burnt.

This was in a 97 Legacy GT, not sure what your car is.

Good Luck with it.
Reply With Quote
  #3  
Old 11-21-2003, 03:15 PM
02legacy 02legacy is offline
AF Newbie
 
Join Date: Nov 2003
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Front Panel Lights went out after installing new stereo deck

I have a 2002 legacy and i did the same thing were you able to fix it? if so how?
Quote:
Originally Posted by dmandave
Alright so I just got a new 10" sub, 500w amp, and a new deck. I installed the new deck and had to cut all the existing wires from the stock deck and splice most to the new deck. When I finished I found that the front panel (speedometer/tach/fuel) light no longer worked. Checked all the fuses, all good. Cant figure if mabye one of the wires should have connected to something and I cut the circuit.
Current wires left unattached:
Blue on yellow (12V switched)
Orange on green (no current, possibly the spliced wire???)
Green on white (12V switched, controlled by headlight switch, Fuse #9)

Any help would be awesome, I'm a 17 year old high school kid who's just getting into this and needs a little help, thanks in advance.

- Dave ([email protected])
Reply With Quote
  #4  
Old 11-21-2003, 03:56 PM
rollins097 rollins097 is offline
AF Newbie
 
Join Date: Nov 2003
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
I just replaced the illumination module, relay looking thing..
everything has been fine since
Reply With Quote
  #5  
Old 12-06-2003, 02:57 AM
02legacy 02legacy is offline
AF Newbie
 
Join Date: Nov 2003
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Front Panel Lights went out after installing new stereo deck

Quote:
Originally Posted by rollins097
I just replaced the illumination module, relay looking thing..
everything has been fine since
where did you buy the illumination module (relay)? I whent to the dealer and they wanted $234 just to look at the problem. So I need to fix this my self and any help would be much aprieciated
Reply With Quote
  #6  
Old 12-06-2003, 08:03 AM
rollins097 rollins097 is offline
AF Newbie
 
Join Date: Nov 2003
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Front Panel Lights went out after installing new stereo deck

I think the dealer wanted about $80 for just the module...I got it from a local family owned garage, who sells used subarus and parts, for like $20...

even for the $80 dealer part, it only takes like 5 minutes to change...and if it doesn't fix your problem just take it back....if the module doesn't fix it, then they may have to look at it.

Good luck with it.
Reply With Quote
 
Reply

POST REPLY TO THIS THREAD

Go Back   Automotive Forums Car Chat > Subaru > Legacy / Liberty / Baja


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 02:55 PM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts