-
Grand Future Air Dried Fresh Beef Dog Food
Air Dried Dog Food | Fresh Beef

Carnivore Diet for Dogs

Go Back   Automotive Forums Car Chat > Buick > Regal
Register FAQ Community
Reply Show Printable Version Show Printable Version | Subscription Subscribe to this Thread
 
Thread Tools
  #1  
Old 10-22-2003, 11:25 AM
hiprsc hiprsc is offline
AF Newbie
 
Join Date: Oct 2003
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Erratic power locks and no keyless entry

I just purchased a used 1992 Buick Regal. The power locks work erratically and the keyless entry does not work at all.

The power locks work erratically, sometimes they do and sometimes they don't. You can unlock and lock them about five times and then they just stop working. If you close the door and just sit there you can here a small click from each door after a few seconds, same thing if you pull on the door latch handle.

I've tried reprogramming the keyless entry. There is a wire by the attenna for doing this. Your supposed to ground it then the locks are supposed to pulse. After that you only have to press any button on the remote to reprogam it, least this is what I been told and read on another post in this forumn. After grounding the wire the locks did pulse but the keyless entry still doesnt work.

It was hit on the front drivers side corner with some minor damage. The fender and the bumber needed to be replaced. There was no structural damage.

Any advice would be greatly appreciated, hoping to fix it myself if it is something simple so I don't have to shell out a big chunk of change.
Reply With Quote
  #2  
Old 10-22-2003, 09:48 PM
The Burning Rom The Burning Rom is offline
AF Enthusiast
 
Join Date: Sep 2003
Posts: 350
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via AIM to The Burning Rom Send a message via MSN to The Burning Rom Send a message via Yahoo to The Burning Rom
Re: Erratic power locks and no keyless entry

Have you checked the fuses for the power locks?

Also, is the remote the correct one for the year?

There could be a loose ground somewhere that is causing sparatic operation. Or it coudl be that the RKE (Remote Keyless Entry) box needs to be either fixed or replaced to get the keyless system to work again. That may also be what is wrong with the power locks.
__________________
www.wicgp.com <- Wisconsin Grand Prix Club
1999 Black Grand Prix GT Coupe
1990 Red ASC/Mclaren Grand Prix Turbo Coupe
1990 Metallic Blue & Silver Grand Prix LE Coupe
1979 Blue Dodge Ramcharger
Reply With Quote
  #3  
Old 10-25-2003, 04:33 PM
BOOZER BOOZER is offline
AF Newbie
 
Join Date: Oct 2003
Posts: 95
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Erratic power locks and no keyless entry

Your discription of your problem has me scratching my head. Provided you can manually lock & unlock the door, it sounds like the transmitter is working & the reciever is seeing a signal, the locks operate the same way or act up the same way with the switch used, yes? Your hearing the actuators work, they just dont operate the mechanism, right??
If that's what's happening i'd check the lock relay, may have voltage but not amperage to operate the actuator. After that pull the door panel off, the lock actuator comes off with the lock assy & disassembles from there. The act has a rubber end that engagues the lock & has been updated over the years. Is it loose or missing ? The origional material is a white/neutral color, the updated is black & serviced in a replacement kit part # 25664043, it has 2 pieces per kit. About a $6.00-$8.00 repair. If the actuator itself has to be replaced, expect about $65.00 each.
If I was thick headed & were dealing with the RKE
system problem, disreguard this, but it sounds like a power lock prob to me. You did say you hear something click in the door after doing a reprogram.
Reply With Quote
 
Reply

POST REPLY TO THIS THREAD

Go Back   Automotive Forums Car Chat > Buick > Regal


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 07:37 PM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts