|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
||||
|
||||
|
Ready to pull my hair out
I replaced the eng and tranny in my full size 90 Blazer with a crate 350 and rebuilt 700r4,both from dealer.the old engine was running,but had a bad knock..OK... I installed a new fuel pump,filter..But the problem is I'm not getting fuel to the TBI now..I don't get it,it worked before!!
there isn't any power getting to the fuel pump,the fuses are good,everything is pluged in,fusable links are good,relay is good. I ran a wire from the positive side battery term to the fuel pump,and the pump pumped,but still nothing at the TBI. But when I try to get a code from the ECM,the check engine light is not on,the bulb is good. CAN SOMEONE PLEEEEEEEEEEEEEEEEZE HELP!!! Thank you for your support!!!! Doug |
|
#2
|
||||
|
||||
|
Re: Ready to pull my hair out
The SES light should come one with the key turned to the run position...does it?
You may have left a wire loose during the engine swap...happens....check the grounds! Remove the injector connector and install a test light..spin the engine over..does the light blink?
__________________
Why do you never have enough time or money to do the job right the first time, but enough time and money to do it again? Got all the certifications 25 years ASE Certified Master Technician GM WCT Yea..I work at a DEALERSHIP....got a problem with that? Want to diagnose cars like the Pros? FOR SALE: OTC Perception 2 channel Labscope (badged as a Matco Reality) This is my personal labscope that I use to diagnose waveforms, like new, comes with leads and training video PM Me for details |
|
#3
|
||||
|
||||
|
Thanks for your fast response!!!!
That's kinda what I was thinking,something real easy and often over looked... I'll try it tomorrow,since the truck is outside and it desided to rain today!!!! I'll let ya know what I find... Thanks again for your support, Doug |
| ||||||||||||||||||||||||||||||||||||||
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|