Classifieds only thread.

[Phact]

hit me up with an offer

Sony NW-MS7 MP3 Player


Compaq Ipaq H3135


Que USB CD-RW Drive(External as seen)


Ricoh MP7040A CD-R/RW Drive


Kenwood ps300 Performance standard series


2 Sport NS-1 Tires with 1 Almost new Federal supersteel


Also i am parting out my 91 dx hatch here is a list of parts.

The list of parts are:
-DX/LX transmission - 105k miles, worn bearings
-d15 block with a6 head
-DX bumper to frame brackets
-every interior piece except rear hatch (little to no scratches, but some painting has been done by previous owner)
-3 glove boxes (all broken in some way)
-stock Si springs
-blinker / light steering column piece
-2 exhaust connector pieces
-DX intake piping with filter box
-2 stock DX springs
-full LX intake (piping, filter box, resonator, snorkel, rubber joint)
-1 right taillight
DX door speaker pods
-2 dash vents
-full set of DX seatbelts
-DX heater controls
-an extra wiring harness (mpfi, but not sure if it is HF or Si)
-extra front center console
-dx steering wheel
-radiator hose
-2 ecu covers
-full set of D-series 4G motor mounts

If you are interested in buying and you want individual pictures of the parts in question, email me and let me know and I will snap pics for you.

[HONDABOND]

D16A6 Bare block. $100 + shiping (Good condition)
D16A6 Crankshaft $50 + shiping (Again, good condition)
D16A6 Valve cover gasket set NEW $20
A6 flywheel $50
Valve cover $50

I got a shitload of parts, ask, and you may recieve.

[HONDABOND]

I also got 3 sets of injectors.

[BLU CIVIC]

2.25" from cat back dual exhaust with 2 separate mufflers....

mufflers cost me $200 and the install was $150....selling or $75 and trade for ur existing stock exhaust (has to be in some kinda good shape)
if need be we can trade bumpers also b/c i already have the hole sut out

[EFStali]

Alright this is whats up! My friend is trashing his 89 civic lx, he has pretty much all parts, besides bumpers and tail lights (busted off)

2 valve covers
alternator
almost anything from engine
hood
fenders
trunk lid
90-93 cluster from teggie(with harness)
center radio bezel for a civic and a crx
etc.

he just wants to sell what he can before he gets it trashed.

[91lxdreamer]

Ive got a set of 88-89 reverse indiglos that I bought from ebay. They are brand new, still in the box, they just didnt fit on my car. Heres a link if you want to see what they look like. The page says 88-91 but its only for 88-89. Also, they look like the bottom pic, if you want to see waht they look like at night, pm me or check my other thread for the pics. I want to get rid of them so I'm sellin them for 15 pluss shippin.

http://cgi.ebay.com/ebaymotors/ws/eB...tem=2426492629

[BigBearWest]

WTB: Cold air intake for my 91 hatch back. For Cheap PLZ

[1.5 liter]

wtb: stock taillights for a 88 . in good condition

[91civichatch2571]

I have for Sale the following:
-ZC Tranny w/ intermediate shaft (non-lsd)
-Stock Si (hatch) center console w/ boot
-Stock Si struts and coils
-90-91 bumper lenses (stock)
-88-91 Si ECU (5-spd)
-90-91 clear corners
-88-91 Si shift linkage
-88-91 Power steering and A/C units
-New Exedy clutch kit that fits the following vehicles...
-90-95 Civic/CRX 1.5L (wagon also)
-90-'00 Civic/CRX 1.6L (wagon also)
-93-97 Del-Sol 1.5/1.6L

Please throw me any considerable offers. Im really in need of some money to keep my civic on the road. If no offers are made, it will all be thrown up for grabs on ebay

[NJ1989si]

I`ll take some pics if you need them

1989 si parts:
2- PM6 ECU`s 5 speed
bolt on exhaust
2- 89si seats ( small rip in drivers side seat)
2 D16 throttle bodies
intake manifold (bare)
stock tail lights
Ractive ram air

email me at [email protected] for pics or questions

[Santas90Si]

http://cgi.ebay.com/ebaymotors/ws/eB...tem=2427175757


$250 no reserve. I am taking a big loss on this I have about $400 into the kit. Its not complete but there are only a few things left to buy.

[2000dollarZCbs]

if you have any of this stuff and are willing to part with it then let me know.

ZC distributor, (NEED THAT BAD)
SI air box
SI cluster (90-91)
SI seats (90-91)
jdm front end (if anyone is willing to part with)
carbon fiber hood ( regular or ZC, i dont care)
regamaster EVO rims 15' (gunmetal preferred)
stock black spoiler
greddy exhaust (88-91 hatch)
stock corners (90-91) willing to trade for clear corners
ZC spark plug wires that are CLEAN (mine are covered in black shit)
headers. (d16 headers work too)

let me know if you have and how much you want. thanks

[Carnivore]

anyone have clear taillights?

[Jay eS Iye]

FS: (2) Extreme Front bumpers: one has turn signal holes, other doesn't. Never been mounted to my car, just taking up space in my garage. Really want to sell. Pics on request.
$155 + shipping OBO

Dropzone Drop Springs: should be a 2.25 inch drop (possibly 2.5), never been installed. Pics on request. $70 + shipping OBO


WTB: Intake Manifold from either d16a6 (current engine), d16z6, d16y8 (preferred) or any other d16's i'm forgetting.

[XxLuckyLisaxX]

Alright im selling whats left of my 1995 integra that im not using all these prices are flexible.........
I can shoot pics of any of the items

-integra 97gsr/special edition 4 rims and tires (toyo spectrum touring radials with a shit load of tread) im looking for $300
-a/c compressor of the 95 integra it says r12 and r134a compatible this compressor is only a year old, have receipts for it $150
-95 integra hydraulic 5 speed tranny from a jdm motor qouted to have 25,000 miles and drove it for 5,000 after that no grinds...$350
-ABS(anti-lock braking system) whole system $75
-greddy full catback exhaust nothing wrong with it, it just has a couple dents on the bottom $75
-srs airbags tan coverings $75
-radiator and fan $50
-power steering pump $30
-dash (tan) with $200 indiglo gauges and srs airbags...$200 without either of those price lower...gauges might be sold seperately if no one buys the dash
-rear bumper black no dents no nothing $75
-all paneling besides the center console (tan) $50 will also sell it for a higher price with the dash
-also have all mounts willing to let go of them for cheap since i have no use for them
- also any miscellaneous parts you need like this hose or that whatever i might have.

Remember all prices are negoitable!!!
now keep in mind most of these things i cannot ship just too damn big! but if you would like me to ship then you will have to PAY SHIPPING!

pickups are more than welcome!!!! im in central cali, stockton area.

contact me by pm or email me at [email protected]