|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Forced Induction Discuss topics relating to turbochargers, superchargers, and nitrous oxide systems. |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
08-27-2003, 01:53 PM
|
|||
|
|||
|
Turbo setup? Confused..need help
Hey people...i want to go turbo, but im not sure about alot of things, can someone clear this up for me.
On a near stock b18C1 motor, i know i can run low psi, but i am wondering about everything needed to run the turbo at low psi. i know i dont really need any motor upgrades until i start pushing higher psi, but i do need to know what all i need for the turbo to run. Like if i had just the turbo, then what would i need. The Pipeing, downpipe? Do you absolutly need an intercooler? or is that just for more gains? boost controller intake for a turbo? that funny curvy header thingy? im lost, and just looking for info, thanks 
|
|
#2
08-27-2003, 01:57 PM
|
||||
|
||||
|
do a search and u should find everthing that u need....and afterwards then ask b/c i know u will want to know which product is best for the different applications in a turbo set-up
__________________
The name's Adrian 1990 Civic HB Si - 265.7whp/223tq @9.2psi. Tuned on NepTune by J.Mills 1991 Civic Sedan DX - 296.3whp/230tq @1bar. Tuned on NepTune by J.Mills 1991 Civic Sedan DX - 185.8whp/139tq. Tuned on NepTune by J.Mills 2006 G35 Coupe 6MT - Stock 2011 CR-Z - Stock
|
| ||||||||||||||||||
|
POST REPLY TO THIS THREAD |
 |
|
|
