|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| '88 - '91 Civic | CRX | Wagon | Shuttlee Partnership with: LadyNRedSi.com |
![]() |
Show Printable Version |
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
|
|||
|
|||
|
I have to replace my master cylinder and I was wondering if the 90-93 Integra mc would fit into my 91 STD hb?
|
|
#2
|
||||
|
||||
|
wait for more opinions, but im pretty sure that they do, i think alot of people use them when they do the rear disc conversion, but im not positive,
__________________
Id rather be drifting...
|
|
#3
|
|||
|
|||
|
yeah they fit. The MC on yours should have stamped on it the size like 5/8 or 11/16. make sure the teg mc is bigger (most probably are), just so your not doing a swap and putting the same thing on. only thing is, i'm not sure if the teg has abs and if it matters. I used the crx si on and had no problem
|
|
#4
|
||||
|
||||
|
You'll need the integ brake booster too since the mounting points are opposite of the civic, I got both at a junk yard for $70
|
| |||||||||||||||||||||||||||||||||
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|