|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
I have a question on the headlight assembly (the plastic cover). My drivers side is becoming "foggy," for lack of a better term. Are there any products that can take this out, or is the plastic doomed?
If it's doomed, are there any places that sell a replacement headlamp assembly? I tried mopar.com, but they won't let me find and order parts like gmpartsdirect does, it just tells me to go to the dealer to get genuine Mopar parts. I guess I'll just wait this out and see what happens. Thanks in advance, Dan
__________________
'95 Chrysler LHS, wrecked, see it here. ![]() '95 Buick LeSabre Custom. 101,000 miles, 3.8, auto. Almost a bigger piece of shit than my LHS was!! '01 Silverado 2500. EC/SB, 6.0/auto, 4x4. 60,000 miles. Of course it's not mine, it pop's. |
|
#2
|
|||
|
|||
|
Try NewMoparParts.com. I just replaced some trim parts that had been broken by the cellphone installer and all I did was to get the part no.s from the parts counter at the local dealership. and then seaarch their site by pt #. This is the only way to find the parts you are looking for b/c the browse options doesn't let you get to many areas...
Cheers |
|
#3
|
|||
|
|||
|
Re: Headlight/Foglight assembly
Try using regular Brasso polish on the lens cover, especially if it's cloudy or dull.
|
| |||||||||||||||||||||||||||||||||
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|