dodge neon 95 , timingbelt change damper pulley qod

[gearheadjelly]

Have 95 neon SOHC

I have read the pulling the damper pulling is
difficult as it is pressed on at 6000 psi.
and no keyway.

is this true and does it take a special tool
to get it off and put it on.

read this on
http://www.scecnet.net/~neonneon/neonpage.html
thanks for any help. one and all.

good day to all.

[KatWoman]

You can get a 5-ton 3 jaw puller from Autozone, at least in Phx they rent them out for about $40 but you get the $ back when you return it. There is a Miller special tool for Chrysler but its about $250.