g20 modifications

[G20t Associate]

Does anybody have any suggestions on modifications on a 1994 g20 and/or where to get them?

Such as body kits, euro lights, or cleared side marker lights.

[CanadianG]

you gonna spend!
MOney and time are the only issues.

[G20t Associate]

Ya I'm willing to shell out any amount of money for the modifications. Got any ideas or suggestions?

[AznVirus]

do you want SHOW or GO? thats the question.

for SHOW - can custom a 90-93 accord front bumper or 92-95 civic front to fit, side skirts are the same, it seems like the civic sides have much less to trim though, dont know about the back though, there is the full kit for the P10 at www.aerotech.co.nz. or check g20.net and see the kits for the P10, Luke (G22DET) can get them for you. please dont tell me you want those ugly POS euro tail lights. there is no manufactured clear bumper markers for the P10. you have to custom them.

for GO - simple bolt-ons first, intake, headers, exhaust, then you can move on to bigger stuff, cams, pulleys, etc. or if you just want to go big, get the BlueBird DET, its a pretty straightforward swap. you can get it from Luke or try this place, SR20Development.com or http://www.cartunemotorsports.com/

[CanadianG]

1st you need to order a the full set of clear sidemarkers from http:/www.clearcorners.com
2nd you need to get a hotshot CAI http:/www.hotshot.com
3rd you will need the hotshot header if your not going turbo
4th if you ARE going turbo you might wanna find an engine!


hehehe:licker:

[howard_w13]

Originally posted by G20t Associate
Does anybody have any suggestions on modifications on a 1994 g20 and/or where to get them?

Such as body kits, euro lights, or cleared side marker lights.

Have you tried www.g20.net?

:coolguy: :coolguy:

[A380Driver]

I strongly suggest before you go out dishing money for stuff...you need to just chill in this forum and read posts and archives for a month or so...you need to get a good understand about what you're going to do before you do it.

1) it will save you alot of money
2) there will be a better chance that you wont do something bad or break something.

You will thank yourself later by waiting a bit

[Twyztidmind]

Originally Posted by AznVirus

do you want SHOW or GO? thats the question.

for SHOW - can custom a 90-93 accord front bumper or 92-95 civic front to fit, side skirts are the same, it seems like the civic sides have much less to trim though, dont know about the back though, there is the full kit for the P10 at www.aerotech.co.nz. or check g20.net and see the kits for the P10, Luke (G22DET) can get them for you. please dont tell me you want those ugly POS euro tail lights. there is no manufactured clear bumper markers for the P10. you have to custom them.

for GO - simple bolt-ons first, intake, headers, exhaust, then you can move on to bigger stuff, cams, pulleys, etc. or if you just want to go big, get the BlueBird DET, its a pretty straightforward swap. you can get it from Luke or try this place, SR20Development.com or http://www.cartunemotorsports.com/

yes, please whatever you do dont get the euro lights, its an infiniti not a honda