Keyless Entry 1994 Yukon

[MYT30TH]

Any help regarding infomation on reprograming a new key fob would be greatly appreciated I did a search and have tried different procedures listed but have not had any luck It has the Goodwrench keyless entry/alarm system if that helps.

Thanks in Advance !!

[Bas_GMC]

Originally Posted by MYT30TH

Any help regarding infomation on reprograming a new key fob would be greatly appreciated I did a search and have tried different procedures listed but have not had any luck It has the Goodwrench keyless entry/alarm system if that helps.

Thanks in Advance !!

1. Short pin 4 and 8 on the DLC (Data Link Connector) After about 2 second the locks will respond with a cycle (close - open)
2. Press and hold the locjk and unlock button on the first transmitter you want to program, until the locks cycle (about 10 sec)
3. repeat step 2 for each remote (up to 4)
4. remove the short on pin 4 and 8
5. TEST OPERATION

The DLC is located under the steering wheel.

Bas