Off-Road Lighting

Cheechman7 · #1 11-22-2001, 01:25 PM

yo im about to get 2 offroad 7` lights for my x and i want to put them on top of my rach like a picture i saw...do i need something to mount them or can they just be drilled on?

warmonger · #2 11-22-2001, 07:30 PM

Click on my website link below and you will find a mods section and go to lightbar. There I tell you how to convert a factory lightbar for light use.

Cheechman7 · #3 11-23-2001, 06:29 PM

yo that was a good ass mod site...but now that link doesnt work bro.

Olegkha · #4 11-23-2001, 08:49 PM

WAR:

This Personal Web Page space has been provisioned but currently contains no data.
If this is your Personal Web Page and you have questions about posting your Web page on the BellSouth.net server, please refer to the "Publishing my work on the Web" (this is a hot link) section of the Personal Web Page online information located here.
There is no need to respond to this automatically generated message.

warmonger · #5 11-24-2001, 08:13 AM

I have tried it this morning from two different computers and connections and it is running fine. BellSouth servers have occasional fits, so try again. In fact, my mail server is down as we speak.

XXXTERRA · #6 02-05-2002, 09:06 PM

I also used the stock cross member as a light bar, but I kept the gear basket in place. I did lose some room in the basket, but I feel it's a good trade off.

Schludwiller · #7 02-05-2002, 09:24 PM

Nice! So you cut out the basket plastic for the crossbar attachment? Looks very clean.

rhombus · #8 02-05-2002, 09:55 PM

XXX also drilled thru the roof!

One thing for sure he is one for details

ChuckH · #9 02-05-2002, 10:03 PM

If I ever put lights on the roof, I'll probably drill a hole too. Don't want to, but having the wires running in through the doors is not an option.

XXX did a really nice job with the crossbar.

XXXTERRA · #10 02-05-2002, 11:18 PM

Quote:

Originally posted by Schludwiller
Nice! So you cut out the basket plastic for the crossbar attachment? Looks very clean.

Yes Schludwiller, I cut a section just large enough for the cross member attachment to fit and a little extra at the bottom that allows the attachment to slide in and be tightened. I'm very pleased with the results, and the performance of the IPF 968's.

rrdstarr · #11 02-05-2002, 11:39 PM

So why didn't you use the Surco(?) rack to mount the lights too? Was it a height issue? Sweet cut and chop to integrate the basket and the bar BTW!

XXXTERRA · #12 02-06-2002, 12:16 AM

I gave it some thought but decided against it. The Surco light mounts are $60Cdn /pair and I need two, I could make my own, but I don't have the tools to make a clean job, most importantly I may be selling the rack in favour of the silver Urban rack. I would have liked the lights further spread apart, but I was limited with this setup.

Kerensky97 · #13 02-06-2002, 01:04 AM

I'm thinking of doing the same mount because its the only way I can fit 4 lights.

The Hi-Lift Jack sticks halfway over the gear basket.
Does anybody know if there is enough room to fit a crossbar in front of the jack?

XXXTERRA · #14 02-06-2002, 10:02 PM

You would probably have enough room, but you would lose the must useful section of the gear basket. In this case I'd remove the basket all together...or get a new rear bumper and mount the Hilift there:smoker:

Kerensky97 · #15 02-07-2002, 02:04 AM

Quote:

Originally posted by XXXTERRA
You would probably have enough room, but you would lose the must useful section of the gear basket. In this case I'd remove the basket all together...

That's what I was thinking, I've only used the rack 3 times so I'll sacrifice it for the light bar.

Anybody want to trade a gearbasket for a crossbar???

POST REPLY TO THIS THREAD