|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Exterior | bodykits | Lighting When your ready to showoff that 'H' ride, here's your forum! |
![]() |
Show Printable Version |
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
|
|||
|
|||
|
yo i got a new mugen lip for my 95 civic and i dono whether to put it over the stock one or take the stock one off, i tried to take the stock off and it wouldnt budge someone that has one or knows where i can find out how to install it please help me out ite thanks guys pz.
:22yikes:
__________________
nobody really tries to go "rice" but an awful lot of people end up there |
|
#2
|
||||
|
||||
|
you are supposed to take off the old lip. to do this just take the front bumper off and if you look at where the lip is from behind you see a lot of clips and screws holding the lip to the bumper.
__________________
1994 civic ex - b16a sir2 w/lsd too much to list http://www.cardomain.com/memberpage/423478 |
|
#3
|
|||
|
|||
|
i dono what screws to undo the bumper
__________________
nobody really tries to go "rice" but an awful lot of people end up there |
|
#4
|
||||
|
||||
|
if you open the hood you will see 5 or 6 screw right below the hood latch. unscrew those and then you have two more on the sides of the bumper. right where the wheel are there is a screw where the bumper meets the fender. once you get those out then there might be a #10mm bolt under the bumper holding it down. if you got them all out the bumper should come out with some manuvering.
__________________
1994 civic ex - b16a sir2 w/lsd too much to list http://www.cardomain.com/memberpage/423478 |
|
#5
|
||||
|
||||
|
I wish fitting a lip on were the only problems I had. It's not that hard man, just look for little bolts and screws which hold it on
|
|
#6
|
|||
|
|||
|
thanks a lot guys ima get pics asap
__________________
nobody really tries to go "rice" but an awful lot of people end up there |
| ||||||||||||||||||||||||||||||||||||||
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|