Porsche 937 (924 Carrera GTS Club sport) question

[lovegt40]

Does anybody ever make this car in 1/24 scale?
I just have the ordinary 924 from Monogram and was just reading again Stratos75 thread about his friend street car. Monogram model looks not so bad then, maybe to start a conversion.

But before this, I must investigate a little around

the car is this:






Same question for the GTR version.

thank you

[malscar]

Would the Monogram kit be a better starting point than the Hasegawa 944 kit?

[ZakspeedCapri]

Hallo,

there is a Kit from Andy's Modellbau in Germany for Slotcars in 1:24 in GfK, look here:
http://andys-modellbau.eshop.t-onlin...20GFK%20Kit%22
This Kit based on an Burago Diecast Model and is not so scale you like.
From the 924 GTS and GTR are also Kits from DITECH Production in Germany, but i dont know if you can buy it.

[lovegt40]

Originally Posted by malscar

Would the Monogram kit be a better starting point than the Hasegawa 944 kit?

they are different cars. I prefer anyway eventually start from a true 924 than a 944. as Mikhail pointed out at the time I will not consider arii kit cause is not in shape.
Hasegawa 944 is surely better for the already in shape front fenders, but rear ones can be tricky to convert I think.

Some Gfk bodies I have and is really the last option available cause is a hell to work with. The details are pretty lower than plastic models and body surface remains very often rough. Some modelers worked with gfk body and they had a hell too...so thank you for Andy's link but I don't think it works for me (prefer the old way of putty, plasticard, filler...as usual).
Ditech slot I've tried many years ago and get disappointed. Think I am done with them.

[stratos75]

Paolo,
I recommend you to mix the front part of Italeri's Porsche 944S with the rear part of Monogram's Porsche 924. Then you should modify a bit the front bumper and fenders of 944 and, of course, the rear fenders of 924.