Can't control myselft... new order

Vric · #1 06-12-2003, 07:52 AM

Well.. I still wait for my order from HLJ (C-west RX7 + new Tamiya F1) and here is what I ordered last night.. this hobby is a drug

The first 2 one are for me and the Corvette is for my dad.. I know AMT quality might sux.. but i'm sure with some work it could be ok...

Any idea or result (mainly on the mustang) is apreciated

modelcarmaster16 · #2 06-12-2003, 08:16 AM

are you going to built the supra straight from the box?

TheSyndicate · #3 06-12-2003, 08:21 AM

The '67 fastback isn't the greatest of kits. It requires a lot more effort afterwards to get it looking representable.

UKSupraboy · #4 06-12-2003, 08:40 AM

I know the problem!

Yesterday somebody said in a thread that Grand Prix Models had a sale on.

Today, I ordered this :-

1 Toyota Supra #38, Au Sports Racing 2001 by Studio 27 (STUDC2452) @ GBP 6.00 each.
1 Toyota Supra #39, Denso Sports Racing 2001 by Studio 27 (STU2453) @ GBP 90.00 each.
1 Toyota Supra #6, Esso Ultraflow Sports Racing 2001 by Studio 27 (STU2450) @ GBP 85.00 each.

Postage: GBP 8.20

Total: GBP 162.24

God help me when the missus reads the credit card bill

Vric · #5 06-12-2003, 08:56 AM

Quote:

Originally posted by TheSyndicate
The '67 fastback isn't the greatest of kits. It requires a lot more effort afterwards to get it looking representable.

What exactly is so horrible ? I'm kinda experienced modeler and I expect some fit problems, but I'm sure with time and work it could be great

for the Supra, HELL NO I won't do it out of box.. lok of modification need to be done to get a good looking kit (SAS Wing, other rims, brake disk, open hood scoop etc..)

TheSyndicate · #6 06-12-2003, 09:17 AM

It's really just a typical AMT kit, if I remember correctly, the wheels are lackluster and the bumpers will require sanding/puttying.

I trashed the kit a while back so I can't exactly point out its flaws.

nervestrikes · #7 06-12-2003, 09:18 AM

I know the feeling, you don't want to spend it, but you do it anyway.
I just ordered from HLJ :

Tamiya FW Williams
Tamiya Wax
Tamiya Compound
Gundam Panel Line Marker

Martbee · #8 06-12-2003, 10:04 AM

Maybe we're addicted to this shit... damn, just bought me 2 R33 JTCC and a R34... got to stop spending so much... there's so much unbuilt models on the shell that I can't even remember the color of it !!

Bahhh, wtf... anyway, it's a form of art isn't it?? So it's a good thing to express ourself. No?

nervestrikes · #9 06-12-2003, 10:11 AM

True, it is an art. Like the elders say you can't take your money with ya so enjoy what it can do for you alive. I have six models still waiting to be built while I currently am working on the Lancer Evo VII for the last two months cause of lack of time.

Bloodhound · #10 06-13-2003, 01:31 AM

I did the 67 fastback a while back and it was a pretty good fit compared to other non-tamiya kits. it should only need a little sanding, but the rear wheel pieces are way too small so you'll need some spares. mine was made to make large impact without major mods(as originally intended) so I wacked on a better carb, new air filter, rocker covers, magnum 500's, and painted the standard interior grey with a golden skull on the four-speed shifter

I say do it black and put a monstrous muscle mountain in it, with modern 17 inch rims.

Lownslow · #11 06-13-2003, 03:04 AM

Billets on the stang

Honoturtle · #12 06-13-2003, 05:26 AM

Reminds me that I have a 67 to finish. You plan to use the stock 289?? The block even got "holes" for the cylinders, and comes with two sets of valve covers. Anyways, hope you have fun with your new kits!

lowcrome · #13 06-13-2003, 07:45 AM

Quote:

Originally posted by Vric
Well.. I still wait for my order from HLJ (C-west RX7 + new Tamiya F1) and here is what I ordered last night.. this hobby is a drug

The first 2 one are for me and the Corvette is for my dad.. I know AMT quality might sux.. but i'm sure with some work it could be ok...

Any idea or result (mainly on the mustang) is apreciated

thats the same corvette as im workin on

wat kolor r u painting it?

Vric · #14 06-13-2003, 08:01 AM

Quote:

Originally posted by Bloodhound
I did the 67 fastback a while back and it was a pretty good fit compared to other non-tamiya kits. it should only need a little sanding, but the rear wheel pieces are way too small so you'll need some spares. mine was made to make large impact without major mods(as originally intended) so I wacked on a better carb, new air filter, rocker covers, magnum 500's, and painted the standard interior grey with a golden skull on the four-speed shifter I say do it black and put a monstrous muscle mountain in it, with modern 17 inch rims.

thanks for comments... I will take a closer look to the rims even if modern rims would look bizzard a bit.. Do you have any pics of it ? Sure it will be black

Quote:

Originally posted by lowcrome

thats the same corvette as im workin on

wat kolor r u painting it?

my dad mant to make it red with white side.

lowcrome · #15 06-13-2003, 08:51 AM

Quote:

Originally posted by Vric

my dad mant to make it red with white side.

thats how im doin mine

POST REPLY TO THIS THREAD