4.3 Vortec & Drivetrain Removal/Replacement

[Tutype]

If anyone has done this please. I need Procedures/Pics on removing the Motor and Drivetrain from my newly acquired 2000 Blazer 4X4 LT. Any help will be greatly appreciated. I have a Service Manual, but trying to get more insight as the Chilton's manual isn't as detailed as I would like.

Again, Thank you

-TuType

[MT-2500]

Originally Posted by Tutype

If anyone has done this please. I need Procedures/Pics on removing the Motor and Drivetrain from my newly acquired 2000 Blazer 4X4 LT. Any help will be greatly appreciated. I have a Service Manual, but trying to get more insight as the Chilton's manual isn't as detailed as I would like.

Again, Thank you

-TuType

You are welcome.
Here is a link to the all data online DIY repair information.
10 minutes with a piece of plastic and you are set to go.
May be short on pictures but very good on details.
http://www.alldatadiy.com/

On drivetrain are you refering to transmission or rear ends and axels?
Good luck and let us know how it goes.

[thetandycollector]

Originally Posted by Tutype

If anyone has done this please. I need Procedures/Pics on removing the Motor and Drivetrain from my newly acquired 2000 Blazer 4X4 LT. Any help will be greatly appreciated. I have a Service Manual, but trying to get more insight as the Chilton's manual isn't as detailed as I would like.

Again, Thank you

-TuType

If you have a fax machine, or an email, I can send you procedures and pictures regarding the removal and installation of driveline in said Blazer. I just did it about two days ago on my 2001 LT, still have the spec sheets from Mitchell printed out and will be happy to "loan" them to you