parts parts parts.....

[panozdoc]

Hello guys,

After many emails and phone calls requesting that i give this forum another chance I have decided to post my bulk of parts and even my two cars for sell.

I have been forced to register as a vendor so this is the reason for any change in status if anyone notices.

I have many parts to include tubs of parts i do not even know what i have. below is a small list, but a master list and prices is right around the corner. must get the garage back under control, and move on to another car project for this one has lost its appeal.

panoz seats
aluminum fly wheels
quarter master clutches
hydraulic master cylinders
4.6 engines
tremec transmissions
drive shafts
9" ford rear end housings
axles
hubs
spoilers
bird cages
radiators
rear lights
mirrors
susp. parts
koni shocks new and used.
springs new and used
a arms
control arms
window nets
fiber glass body parts
plastic body parts
stickers
pi dash systems
brake parts
ROTORS!
bembo calipers
Bearings
shifter assy.
filters
intake manifolds
headers
exhaust
rear metal "Cage" sections
rear window

* if there is anything in particular that you need feel free to email me at Joedigchattanooga.com or call my cell anytime 423 314 5041. if i do not answer please leave a message for i do own and run an excavating company for a living and it is hard to hear around our equipment at times.

thanks again for your time and look forward to assisting in any way i can. joe

[panozdoc]

Aww i did mention two cars in the first post. I won two Gtwc cars that were wrecked in the last series race. they are ready to be reassembled and i believe i have 90% of the parts for each car to include filters and fluids. the reasoning behind these parts was to rebuild my two cars and race with my father. i have recently lost interest in the cars so will either build and sell, or just flat out sell. all offers and inquiries will be taken seriously.

[panozracing]

I could use a spare plastic GTS nose if anyone has one? I also was going to buy a spare radiator (was going to get an all aluminum one but price talks).

I could also use a replacement kirky seat cover.

New Brembo rotors? New Front spindles? New heim joints? New steering universal joints?

Headlight stickers?

PFC01 pads?

Maybe a new Kydex splitter strip?

All good trailer spares!!!!

[Cobra4B]

Have any cheap seats? I need a passenger seat to put in my Z06 for instructing.

Thanks,

Brian

[David Eastman]

I would be interested in some brake rotors and pads.

David

[NZGTRA17]

Originally Posted by panozdoc

Hello guys,

After many emails and phone calls requesting that i give this forum another chance I have decided to post my bulk of parts and even my two cars for sell.

I have been forced to register as a vendor so this is the reason for any change in status if anyone notices.

I have many parts to include tubs of parts i do not even know what i have. below is a small list, but a master list and prices is right around the corner. must get the garage back under control, and move on to another car project for this one has lost its appeal.

panoz seats
aluminum fly wheels
quarter master clutches
hydraulic master cylinders
4.6 engines
tremec transmissions
drive shafts
9" ford rear end housings
axles
hubs
spoilers
bird cages
radiators
rear lights
mirrors
susp. parts
koni shocks new and used.
springs new and used
a arms
control arms
window nets
fiber glass body parts
plastic body parts
stickers
pi dash systems
brake parts
ROTORS!
bembo calipers
Bearings
shifter assy.
filters
intake manifolds
headers
exhaust
rear metal "Cage" sections
rear window

* if there is anything in particular that you need feel free to email me at Joedigchattanooga.com or call my cell anytime 423 314 5041. if i do not answer please leave a message for i do own and run an excavating company for a living and it is hard to hear around our equipment at times.

thanks again for your time and look forward to assisting in any way i can. joe

Joe, can you pse reconfirm your E address as I have tried the address supplied with no sucess.

Thanks, Kel.

[panozdoc]

kelm

email address is [email protected] all emails have been responded too at this time.

thanks for your time guys, and feel free to call or email anytime 423 314 5041


Ps. Sat the 8th i will be hunting and most likely away from the phone.

[eric1h]

how much for one of the tremec trannies?

[Dawgfan]

I think I meet you one weekend at R A. Are you the guy that is either related to or knows Bill Smith? I race the #35 Panoz GTS.

[Panoz26]

Joe, Ill call you in a bit, i NEED a transmission....

[Cobra4B]

Joe I emailed you back on the seats and never heard back. Did you receive my email?

Thanks,

Brian

[panozdoc]

Brian, did not receive an email i do not believe. hitting u up on a pm as well. feel free to call my cell phone. 423 314 5041

[Panoz26]

Originally Posted by panozdoc

Brian, did not receive an email i do not believe. hitting u up on a pm as well. feel free to call my cell phone. 423 314 5041

Joe - let's do this Transmission deal -- I need to get off my ass and get my car done. Please email me and Ill paypal

Devin.

[panozdoc]

devin your transmission is leaving in just a few hours. thanks again for an easy and fast deal. hope this gets your car back up and running soon. best of luck and see you at the track..

All emails and pms have been responded too at this time.
423 314 5041 anytime.

[Panoz26]

Sweet. Thanks again Joe.