Please help!!!!

[dwc1435]

Hey Guys i have a problem. About 6 months ago i replaced the passenger front strut bearing. Steering was perfect. After we replaced that, i took it for a ride and now i cant turn the car to the drivers side only, but it is not all the time. If i step on the gas it steers easy. The fluid in the resevoir is getting hot also no, i figure i have a blocked passege. But if i lift up the car on either side it doesnt do it. if it was the rack, wouldnt it do it all the time since its "bad". I have both outer tie rods brand new. One thing is that on the drivers side the lower control arm bushing on the front is below the control arm. also i am getting a weird noise like a pressure being trapped or somethin. PLEASE HELP.

[richtazz]

please include the year, engine and trim level (GT, SE, GTP) to help us help you.

[dwc1435]

Sorry, it is a 2000 Pontiac Grand Prix SE, 3.1 motor, automatic transmission.

[tblake]

You could have a binding strut bearing or ball joint. Best thing to do would be to disconnect the tie rod ends and turn each wheel/strut assembly back and forthe by hand and see if one is binding up.