|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
05-07-2003, 12:16 PM
|
|||
|
|||
|
1964 Parts Wanted
I am looking for a power steering pump, pulley and mounting brackets that will work on my 1964 Impala with a 283 motor and short (5-inch) water pump.
Also, I am looking for a power brake booster for the same vehicle. I know there are plenty of these available from retailers, but I am looking for junk yard or used parts. Thanks, Chris 
|
|
#2
06-05-2003, 12:14 PM
|
||||
|
||||
|
Give this guy an email...James is a cool guy and located in Louisville, KY...I have bought several parts from him...He has a Impala Junk Yard with many 64 parts to choose from
[email protected] If he doesnt have them, You can always try Hubbards Impala Parts or Impala Bob's
__________________
UnitedridaZ CC www.unitedridaz.org 
|
|
#3
07-27-2003, 07:35 AM
|
|||
|
|||
auto
Hi, I have the mounting bracket for the power steering pump and the pully as well. Let me know if you are still in need of these parts.
Roxann
|
|
#4
07-27-2003, 10:18 AM
|
|||
|
|||
|
i NEED THE PULLEY THAT MOUNTS DOWN ON THE MOTOR WITH THE ALTERNATOR PULLEY
DO YOU HAVE THAT ONE?
|
|
#5
07-27-2003, 11:57 AM
|
|||
|
|||
|
Are you asaking for the pully that goes on the alt. and the pully from the power steering pump? I have all the pullys of the engine and the power steering pump and mounting bracket as well.
|
|
#6
07-27-2003, 06:39 PM
|
|||
|
|||
|
I have the pulley that is connected directly to the pump.
I need the one on the other end of the belt that connects it to the motor.
|
|
#7
07-27-2003, 06:42 PM
|
|||
|
|||
|
Here's where I need the pulley.
On the harmonic balancer.
|
|
#8
07-27-2003, 09:04 PM
|
|||
|
|||
|
The pulley I have is a doubble pulley as this car had air as well as power steering. I may have a singal pulley I will look.
|
|
#9
07-28-2003, 08:52 AM
|
|||
|
|||
|
Cool... Thanks.
The picture I showed is what I currently have. The only belt on my car is for the alternator. Does the power steering pump drive from a separate pulley on the harmonic balancer or do i just have to put a longer belt on to use the existing pulley to drive the alt and ps? If I bought your double pulley, I would then Have essentially 3 pulleys on my harmonic balancer, correct? The one with tha ac would be ok too as I may decide to do something with it at a later date.
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
