starter repair 89 v6

[redbaron1]

how do you replace the starter drive on the gear reduction starter.

[2000CAYukon]

Originally Posted by redbaron1

how do you replace the starter drive on the gear reduction starter.

I replaced one about a month ago on my Impala. The starter drive is held in place by a fork so it took some time to get it right. I had a hell of a time finding just the starter drive. I ended up going to a place that rebuilds starters and bought one from them.

This should help: http://www.delcoremy.com/pdfs/servic...ent/1M-128.pdf

//2000CAYukon

[j cAT]

Originally Posted by redbaron1

how do you replace the starter drive on the gear reduction starter.

many yrs ago repairing a starter or alternator was common practice..today how ever time is money and for maximum profit shops do not repair these items therefore finding parts is almost impossible...

then if found the cost is too great to justify this !

[redbaron1]

the starter is diffrent from the one at the delco site it must be a light duty starter the sol. is is not bolted onlucks like it might be pressed in.
thank you

[2000CAYukon]

Originally Posted by redbaron1

the starter is diffrent from the one at the delco site it must be a light duty starter the sol. is is not bolted onlucks like it might be pressed in.
thank you

The one I did last month also had the solenoid pressed on and I would not call it a light duty starter. You can still rebuild it, you just have to get the starter drive clipped into the shift lever.

//2000CAYukon