|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#31
04-21-2006, 12:50 PM
|
||||
|
||||
|
Re: Can you tell?
ok,ok i think i am going tbi now, but will a 454 tbi fit on a 305? i thought only on a 350? i will run tbi, but i think i am still going to build my own 350.
__________________
95 Z71 Silverado 4x4 ext. cab Mods- Flowmaster Exhaust,Intake 
|
|
#33
04-24-2006, 08:14 PM
|
||||
|
||||
|
Re: Can you tell?
ok, so here is the update, i did not get that block because it was going to be $250-$350 for shipping. So i am just going to keep my eye open for a 350 block that needs rebuilt. And i will run the tbi system on it with the 454 tb.
__________________
95 Z71 Silverado 4x4 ext. cab Mods- Flowmaster Exhaust,Intake
|
|
#34
04-24-2006, 10:01 PM
|
||||
|
||||
|
Re: Can you tell?
the stealthram system with the computer management system and fuel kit with injectors and all is over 2000. The manifold itself can be had for around 500-600 dollars. Buddy of mine is running that system and is making about 360hp to the wheels with a mild 355 build. Doesnt seem like much till you look at his torque which is about 430ft/lbs. I think the tbi will be more work but like he said geno is going to prove me wrong.
__________________
92 z28 camaro 5.7 TPI current - slp intake runners and base-BBK 52mm throttle body-MSD 8.5mm wires, blaster coil, and 6AL Box-edelbrock headers-160 degree stat.-hotchkis strut tower brace waiting in the garage - LQ4, milled heads 317 casting (10.5 to 1), hardened pushrods, ported LS6 oil pump, manley dual spings with titanium retainers, MTI X1 cam, hawks longtube headers 
|
|
#35
04-24-2006, 10:05 PM
|
||||
|
||||
|
Re: Can you tell?
http://www.holley.com/92106011.asp
thats essentially all you would be building. I know it will make good power, just seems like a hard way to go. With a tpi system with the stealth ram manifold and the right cam and tune and ported heads you can make very good power and youll have your top end. Not a lot of it but enough. Like my buddy's car with 430lb/ft. That torque is what is going to get you moving.
__________________
92 z28 camaro 5.7 TPI current - slp intake runners and base-BBK 52mm throttle body-MSD 8.5mm wires, blaster coil, and 6AL Box-edelbrock headers-160 degree stat.-hotchkis strut tower brace waiting in the garage - LQ4, milled heads 317 casting (10.5 to 1), hardened pushrods, ported LS6 oil pump, manley dual spings with titanium retainers, MTI X1 cam, hawks longtube headers
|
|
#36
04-24-2006, 10:22 PM
|
||||
|
||||
|
Re: Can you tell?
i am still kinda still unshure but i am leaning towards tbi because it is cheeper, i was looking at the FI kits for tbi motors but they are like $2,000. So i think i am still going to go tbi.
__________________
95 Z71 Silverado 4x4 ext. cab Mods- Flowmaster Exhaust,Intake
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
