1/12 Kremer K3 Porsche 935

[engel07]

2.project of 3D-Design works with sketchup - making quadfaces for subd...
(i hate overloaded 3d programes with unuasable GUI and need to read and view tons of boring video tutorials...)
The other 3D-Design project is the AMG W08...

Nose:
green = Quadface, blue = triangle


Quadfaces and Subd (Catmull–Clark Subdivision Surface) make a perfect smooth surface.
BTW: one of the vents is not smoothed



Rear hood - now adding thickness for 3d printing.

[360spider]

Cool stuff.

[engel07]

Body design work

[360spider]

Wait - you are printing the whole thing?

[Capri-Schorsch]

Not the whole thing, only the body parts.

[engel07]

Progress report - the body is nearly done.

[360spider]

Looks good.

[Capri-Schorsch]

Hi, today i can show you more than render pics.
The body arrived today.Just right before Christmas.
Santa was fast this year.








Looking good,really good in my eyes.
Here with a test fit onto the chassis of the Tamiya 935.











I am really impressed how good this printed body is.
Hats up to Torsten! Fantastic job.

Next step will be filler onto the body and smooth it step by step.

happy Christmas and happy holidays to all modelers here.
regards Christian

[Borjacho]

I have just felt in love with this body you created. Absolutely amazing!

[sjelic]

It came out really nice, you will cast it or use the print?

[Capri-Schorsch]

It's not my fame.
Torsten from scaleautofactory. com did the job.
Now it's my turn to make the mold for casting.
A chassis and the dashboard is also in the making.

[lovegt40]

it´s a super model also this one Chris.

I think there is however a mistake in the upper part of front windshiled ( upper frame edges and upper line) as well as the upper edges on the rear windshield frame.
The entire roof should be more round, as from the original 911 .



In tamiya 1/12 model of 935 this specific part is taken real well. Take a look on it cause is a too important part for the overall look of the finished model (I have my own deadly passion for those 911s, u know )

great model and amazing job from Torsten

[Ian63]

Christian, this looks even more wonderful than your previous Models.

One question, for either you or Torsten. Having got the 3d model created for printing, could this then be scaled down to print a 1/24 version. I realise that some after printing work would have to be done to fit it to any of the available 1/24 chassis. but that would be only a minor problem.

Congratulations on a wonderful looking job.

Ian

[lovegt40]

Originally Posted by Ian63

Christian, this looks even more wonderful than your previous Models.

One question, for either you or Torsten. Having got the 3d model created for printing, could this then be scaled down to print a 1/24 version. I realise that some after printing work would have to be done to fit it to any of the available 1/24 chassis. but that would be only a minor problem.

Congratulations on a wonderful looking job.

Ian

It already exist in 1/24 from original little garage then copied by scale coachworks and already announced as full plastic kit in 2019 by beemax. So dunno if worth the effort

[Capri-Schorsch]

Will take a closer look at the shape of it in a couple of days.
It's not too late to change this.
Thanks for the input.