Nissan GTR - Page 2

sean781006 · 11-23-2010, 12:18 PM

That's an awesome looking gtr. I love the working doors!
Welcome bro. Lol

carnicero83 · 11-25-2010, 01:35 PM

welcome guy!!
your model is amazing!!

Simas17 · 11-26-2010, 12:51 PM

Amazing

702VegasLife · 11-26-2010, 03:27 PM

Deff. two thumbs up, carbon and black shine look awsome !

nachohd · 12-07-2010, 03:16 PM

Hello! Welcome to the forum.
Excellent introduction. Body paint is simply perfect!
Congrats,

Nachohd

ferrari2k · 12-21-2010, 04:39 PM

Hi, I now have the same kit + door transkit.
How did you add the red to the logo under the opened door?
Look at this picture, to know what I mean:

autodecepticon · 12-21-2010, 07:38 PM

Quote:

Originally Posted by ferrari2k

Hi, I now have the same kit + door transkit.
How did you add the red to the logo under the opened door?
Look at this picture, to know what I mean:

thanks bro, as for the red "R", what i did was just thin down the clear red n apply on tht "R"
all the best on your build, if need any help or share experience on this transkit, do feel free to drop a message here.

ferrari2k · 12-22-2010, 04:51 AM

Ah, thanks for the answer, though I hoped for a simpler way of doing that, the logo is f*cking small

Anyway, thanks and have a nice christmas

ferrari2k · 09-01-2012, 10:48 AM

Quote:

Originally Posted by autodecepticon

thanks bro, as for the red "R", what i did was just thin down the clear red n apply on tht "R"
all the best on your build, if need any help or share experience on this transkit, do feel free to drop a message here.

Hi, I have finally got to work on this beauty and I immediately stumbled to some questions:
Unfortunately there is no indication what to chop off from the original kit. Yeah, the doors, obviously, but then what else? The window, for sure, and the inner door frame from the kit.
But there is a bit more plastic on the side of the dashboard, that needs to be cut away, right? I cannot get the parts to fit together properly, so if you have some pics during your build process I will absolutely look forward to see them

Outlaw66 · 09-01-2012, 05:33 PM

Beautiful work...the doors operational are very good...

I liked the carbon fiber parts...they are very well applied...

Congratulations...

ekha · 09-02-2012, 04:15 AM

Wow! I like this car and your model! Great job!

Advise: try to shoot models with maximum value "f." for better DoF.

chaos · 09-02-2012, 06:17 PM

Simply superb all around!

autodecepticon · 09-03-2012, 02:45 AM

Quote:

Originally Posted by ferrari2k

Hi, I have finally got to work on this beauty and I immediately stumbled to some questions:
Unfortunately there is no indication what to chop off from the original kit. Yeah, the doors, obviously, but then what else? The window, for sure, and the inner door frame from the kit.
But there is a bit more plastic on the side of the dashboard, that needs to be cut away, right? I cannot get the parts to fit together properly, so if you have some pics during your build process I will absolutely look forward to see them

hello, glad to hear that! you already mentioned those that needed to be cut, as for dash board, you are right, it need to be trimmed so that the inner door can be fit in, just sand it bit by bit untill it fit in nicely. WIP picture not much for this car, another thing to watch out is, dont bother trying the PE door hinge that provided with this transkit. it wont work! Rear seat panel, the back part after u separate from the interior door panel, that part need to be glue it to the body, not to the interor tub. hope can help, can shoot me more question anytime, i try my best to share it. all the best.

exhaust smoke · 09-03-2012, 05:53 AM

Beautiful job!

ferrari2k · 09-03-2012, 01:54 PM

Quote:

Originally Posted by autodecepticon

hello, glad to hear that! you already mentioned those that needed to be cut, as for dash board, you are right, it need to be trimmed so that the inner door can be fit in, just sand it bit by bit untill it fit in nicely. WIP picture not much for this car, another thing to watch out is, dont bother trying the PE door hinge that provided with this transkit. it wont work! Rear seat panel, the back part after u separate from the interior door panel, that part need to be glue it to the body, not to the interor tub. hope can help, can shoot me more question anytime, i try my best to share it. all the best.

OK, I already figured out that I needed to sand away the parts left and right of the dash.
It now fits better

Is there a special reason why I should glue the rear door panels to the body instead of the tub? It fits quite well now.
What door hinge did you use to get it to work, if the PE doesn't?
And did you cut away material of the door underlay so the body can fit better? Fit is not that good at my model.
And what seems to be the case, the A-pillars seem to be bent inwards, how can I bend them outwards?
Thanks for your answers

Thread Thread Starter Forum Replies Last Post

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
any truth to rumor nissan is going to discontinue the gtr?	lewazzinaro	Car Rumors & Concepts	7	01-10-2015 07:19 PM
Tamiya Nissan GTR R35	Egil	Completed Projects / Gallery	14	03-22-2010 01:45 PM
Nissan GTR R35 & Xanavi Nismo GTR R34	Iskandana	Completed Projects / Gallery	3	01-15-2010 07:01 PM
Illtech Auto Salon - Nissan GTR + Nissan GTR P800 0-300 km/h run	trev0006	Car Videos	0	10-19-2009 08:53 PM
FS: 2001 JDM Nissan GTR V-Spec that is custom converted to LHD!	2001_Civic_Coupe	Classifieds	26	06-06-2003 09:00 AM

GET HEALTHY AFFORDABLE DOG FOOD

DEVELOPED BY THE AUTOMOTIVEFORUMS.COM FOUNDER & THE TOP AMERICAN BULLDOG BREEDER IN THE WORLD THROUGH DECADES OF EXPERIENCE. WE KNOW DOGS.

CONSUMED BY HUNDREDS OF GRAND FUTURE AMERICAN BULLDOGS FOR YEARS.

NOW AVAILABLE TO THE GENERAL PUBLIC FOR THE FIRST TIME

PROPER NUTRITION FOR ALL BREEDS & AGES

POST REPLY TO THIS THREAD