Corvette C5-R's (nearly complete) - I'm off to the race!! - Page 3

Jay! · #31 03-18-2003, 05:22 PM

Quote:

Originally posted by CADguy
To make the actual cut i used a Jewlers blade. Its a very small thin blade with teeth on all edges. It fits in a standard coping saw, but i didn't use the saw, just the blade.

Pics of the blade, please? How big (diameter) is it?

Gainsbourg · #32 03-19-2003, 02:27 AM

Welcome to AF Matt.

Excellent work on those Corvettes, they both are amazing.

CADguy · #33 03-19-2003, 04:28 AM

The blade was from Zona tools. It's so tiny i couldn't get my digital camera to focus well. But I used the 2/0 size. .02"X.01"x56TPI (teeth per inch). The width of the blade was the same size as the seam.
I picked it up at the local HobbyTown USA. They come 12 to a pack for $3.00 or so.

CADguy · #34 03-19-2003, 08:01 AM

I found a pic of the package. 12 tiny blades are bundled together inside the tube.

POST REPLY TO THIS THREAD