2009-2019 Ford Fiesta Front Bumper Cover Removal

[RyanSwagMechanic]

2009-2019 Ford Fiesta Front Bumper Cover Removal

Tools:
Flat Head
Clip Removal Tool
19mm, 8mm, 7/32in, sockets
Breaker Bar or Impact
T20 driver

Objective:
Remove Front Bumper

Procedure:
Open hood and locate the 3 clips on-top of the bumper without confusing them with the grille clips. Remove those three clips. Raise the vehicle to desired height. Take off both front wheels using your 19mm. Turn the steering wheel to the side you are not working on. Free the wheel well from the bumper by removing the two clips and two T20 screws. Pulling the wheel well back you will find 3 8mm bolts. Remove those. Do the same thing on the other side. Looking from under the car you will find 3 7/32in screws. Remove those and the cover comes off.