Sequoia VSC TRAC problem

[Joe Johns 2]

My VSC signal would flash when I made a right turn and the engine would stop until the turn was completed and then the engine would come back on. My car has 130k and it appears the brake system had never been flushed. I flushed and bled the brake system with fresh Dot 3 brake fluid. Since then the VSC light does not come on and the vehicle doesn't stall when I make turns. It appears the old, contaminated brake fluid and the air in the hydraulic lines and calipers was the problem. I woulds suggest anyone with any VSC related problems try this first as it's cheap,easy to do,and works. Honda suggest changing brake fluid every 2 years. Maybe doing so would prevent problems like this.

[nouchai]

I have a 2002, I have the same problem. When I drive on a dry road / no curve about 40mpg, the VSC TRAC lights come on /flicker and the car pulled on the side with beep. I checked the brake and the fluid. They seem to be ok, but this problem comes on every time i drive it about a mile on the road.