|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
1996 jeep cherokee lighting problem
Hi, my 1996 jeep cherokee is having a problem with the lights when I pull the plunger switch my dashboard blinker lights and high beam light come on but none of my outside lights come on besides my tail lights.
|
|
#2
|
|||
|
|||
|
Re: 1996 jeep cherokee lighting problem
http://www.ebay.com/ Item 281937147925
Pull out switch and check the power to the switch. Check power coming to switch then power leaving switch. Last edited by rhandwor; 06-11-2016 at 07:57 AM. |
|
#3
|
|||
|
|||
|
Re: 1996 jeep cherokee lighting problem
i have the same issue, the side marker lights will occasionally start working again but only for a few days or hours, you probably have a wire that has gotten brittle over the years, trying to find it is not easy, if you find a solution be sure to post other wise id just live with it
|
|
#4
|
|||
|
|||
|
Re: 1996 jeep cherokee lighting problem
It's not that easy to live with it though...
|
|
#5
|
||||
|
||||
|
Re: 1996 jeep cherokee lighting problem
Quote:
Also, I had a Grand Cherokee that acted oddly due to a corroded battery cable not sending enough juice; you may want to check the condition of your battery cables (and battery, while you are at it) to make sure that's in good order.
__________________
Ours: 2020 Jeep Wrangler 2.0, 53k 2013 Toyota FJ Cruiser, 84k Kids: 2005 Honda CRV, 228k |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|